Flashing Android on HTC HD2 (Leo)

[GUIDE] Flashing Your First HD2 Clockwork Mod Android Rom [For Newbs] [GUIDE] Flashing Your First HD2 Clockwork Mod Android Rom [For Newbs] This guide will explain how to install Clockwork Mod on your phone so you can flash CWM Roms, as well as performing other actions.

Clockwork Mod is the traditional way of flashing, updating, backing up and restoring Roms on Android Phones. Many chefs are now only providing Roms in this form so it is best to have it on your phone and know how to use it. 1. YOU NEED HARDSPL 2.08 INSTALLED ON YOUR DEVICE TO FLASH MAGLDR 2. NOTE: There are 3 CWM images attached at the bottom of this thread. 150MB Partition - For lite Roms without Sense such as CM7. If you arent sure which size you need then check the first few posts of the Rom you want to flash as it will usually tell you which size partition it needs. 1.

To start Clockwork Mod keep pressing the 'Volume Down' button to goto Option 8. System ya ***M (partition size) cache ya **M (cache size) [RADIO] The HTC HD2 Master Radio Thread. [RADIO] The HTC HD2 Master Radio Thread Welcome to the Eugenia Radios Project Thread!

So... I've extracted the Radio ROMs from all the HTC stock ROMs out there and I'm giving you the download link for these, in case you want to flash only the RADIO ROM! Downloads: Leo_RADIO_2.15.50.14**: MultiUpload Leo_RADIO_2.14.50.02**: MegaUploadLeo_RADIO_2.12.50.02_2: MegaUpload Leo_RADIO_2.11.50.26**: MegaUpload Leo_RADIO_2.11.50.20**: MegaUpload Leo_RADIO_2.10.50.28_2: MegaUpload Leo_RADIO_2.10.50.26**: MegaUpload Leo_RADIO_2.10.50.19_2: MegaUpload Leo_RADIO_2.08.50.05**: MegaUpload Leo_RADIO_2.07.51.22_2: MegaUpload Thanks to zaharakis for the RapidShare mirrors Installing: For installing a RADIO ROM you need HardSPL installed to your device.

FAQ:*-What is the .7z extension? *-What is a Radio ROM? *-What is rilphone.dll? *-How can I install a new rilphone.dll to my already installed ROM? *-Why change rilphone.dll? Happy flashing! The Eugenia Project Developer -kholk. [TUT] Flashing your First GSM 512LEO Rom - With HSPL4 (For Noobs) This Guide is designed ONLY for HD2 with 512 Mbytes ROM.

If you are unsure then goto Settings, System, Device Information, Hardware Information and look at the Flash Size.If you have a LEO with 1024MB ROM then please use *THIS* guide. Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!! PimBackup is good and free (copy any mms attachments to your storage card or computer seperately) *DO NOT start another process while the flashing process is taking place**DO NOT click off of the status bar... Let it stay in the foreground* *DO NOT let the Screensaver (on your pc) activate* Any of these can lead to a bad flash and possibly brick your phone The Original HardSPL Thread is *HERE* NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)

[DFT]MAGLDR 1.13 released! [AD RECOV support added] [GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs] Flashing Your First NAND Android Rom [For Newbs] If you have any general NAND Android problems then take a look at *THIS* thread which has more tips After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen You most probably have an older incompatable Radio on your phone.

The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine ----------------------------------------------------- I have a 3.14 Rom with an SPL 3.03 and cannot install HardSPL 2.08 You must downgrade your Rom to a Rom with an SPL 2.10 or lower in order to install HardSPL 2.08. When flashing MAGLDR the status remains at 0% for a long time, then gives a USB connection error.