Make a Mind-Controlled Arduino Robot, 1Ed. NeuroSky Store. Pjezoelektriskie SENSOR - Vibrācijas, šoka, elastība, TOUCH ("SENSOR elastību", "SEN-09196") ALCOHOL SENSOR MODULE - Plug and Play ("SEN21723P")
Battery Voltage Over-Voltage Under-Voltage Detection Sensor Module for Arduino - Worldwide Free Shipping. To enable volume discounts on this site, use coupon code: BULKRATE during checkout.
You will see a discount applied at the bottom of the shopping cart. Competitive pricing is available. Contact us for details. Voltage Divider Module - HomeCSP Store. Team Recurse. Engine Temperature sensor / Water Temperature Sensor KTS-W26. Category:Primer - Phidgets Support. HTS-TEMP - Temperature Sensor. HTS-ORPM - Optical RPM Sensor. HTS-VOLT Voltage Sensor. Optical and Magnetic, Incremental and Rotary. What is an Encoder?
An encoder is a sensor of mechanical motion that generates digital signals in response to motion. As an electro-mechanical device, an encoder is able to provide motion control system users with information concerning position, velocity and direction. There are two different types of encoders: linear and rotary. A linear encoder responds to motion along a path, while a rotary encoder responds to rotational motion.
An encoder is generally categorized by the means of its output. Sensors. Compare all products in this category Measure acceleration and track rotation with these accelerometers, gyroscopes, compasses/magnetometers, and combined inertial measurement units (IMUs) and orientation sensors.
These IR distance sensors make it easy to detect and range objects. Our Sharp sensors are less expensive than our sonar range finders and they have higher update rates, but their maximum detection range is shorter. Accurately measure distances over a wide range with our assortment of ultrasonic distance sensors from Maxbotix and Parallax. These sensors use pairs of infrared LEDs and phototransistors to measure how much of the emitted IR light is being reflected from a nearby surface.
High quality DC 12V G1/2 0 2.5 MPa pressure transmitter Water Gas Oil pressure sensor Free shipping-in Sensors from Electronic Components & Supplies on Aliexpress.com. Wholesale price, DC 5V G1/4 0 1.2 MPa / 0 150PSI Pressure Transmitter Water Gas Oil Pressure Sensor-inSensors from Electronic Components & Supplies on Aliexpress.com. Characteristics 1.Suitable for wall hanging furnace, gas furnace, gas storage, etc all kinds of hydraulic, pneumatic pressure measurement 2.Suitable for civil use product batch 3.Static accuracy: plus or minus 1.0% FS 4.Pressure range 0-1.2 MPa (can be customized according to customer requirements) 5.Wide range of temperature compensation 6.Medium for non-corrosive gas, water, oil, etc Specific parameters HK1100C Pressure Sensor.
High Speed Laser Optical Sensor by John Kicklighter. This sensor board offers all the needed components to implement the Avago ADNS-9800 High-Performance LaserStream™ Gaming Sensor with high speed motion detection up to 150 IPS.
The form factor has two mounting holes for embedding into your own design. These chips are hard to source and are not available at the typical electronics distributors. As a result, they have to be ordered from distributors that have minimum order quantities. This is an open hardware project. The schematic, board design and example programming code are open and can be freely downloaded.
Distance. Smart Sensors in 4 to 20 mA Control Loops. This article looks at the integration of sensors into 4 to 20 mA control loops and field bus implementations in industrial automation applications.
Adding intelligence to the sensor allows more control and options for closed or open control loops with tighter latencies, and the article looks at the different approaches to implementing a smart sensor control loop. It looks at devices that are optimized for the control loops such as the Texas Instruments XTR117 transceiver and the HCPL-4200 optocoupler from Avago Technologies, as well as controllers that are optimized for sensors on these control loops such as the ADuC816 from Analog Devices.
Many sensors are designed specifically for the 4 to 20 mA control loops that are commonly found in industrial process control systems. A combination of a digital to analog converter (DAC) and an optimized controller, coupled with the clearly defined 4 to 20 mA range, provides a cost effective and reliable sensor network. Simplex Full duplex. Sensirion SDP sensors measure pressure but even a flow. Calibrated differential pressure sensors will find usage in industry and also in every smart home.
Ventilation, air conditioning (HVAC), or any other applications, where a pressure or a flow of air (gas) is essential, can be precisely regulated only if we know a real pressure/ flow conditions. Monitoring of fans functionality, status of filters, …, even for this purpose are very suitable differential pressure sensors from Swiss company Sensirion with an excellent accuracy and long-term stability. As SDP sensors are differential, they have 2 nozzles. The base of these sensors is a miniature heating element and two temperature sensors. BME280 - bst.com. The BME280 is an integrated environmental sensor developed specifically for mobile applications where size and low power consumption are key design constraints.
The unit combines individual high linearity, high accuracy sensors for pressure, humidity and temperature in an 8-pin metal-lid 2.5 x 2.5 x 0.93 mm3 LGA package, designed for low current consumption (3.6 μA @1Hz), long term stability and high EMC robustness. The humidity sensor features an extremely fast response time which supports performance requirements for emerging applications such as context awareness, and high accuracy over a wide temperature range. The pressure sensor is an absolute barometric pressure sensor with features exceptionally high accuracy and resolution at very low noise. The integrated temperature sensor has been optimized for very low noise and high resolution. It is primarily used for temperature compensation of the pressure and humidity sensors, and can also be used for estimating ambient temperature. Thermo Plug - Hardware. The thermo plug is a small board for measuring temperature and controlling an output device.
One of three different types of temperature sensor can be used: a 100 kΩ NTC/thermistor (glass types can go up to 300°C) a K-type thermocouple (up to 1000°C) with a matching AD597 thermocouple chip a 1-wire DS18B20 sensor (up to 125°C) The DIO pin is tied to a transistor and can be used in different ways: to generate a sound, using an on-board piezo buzzer to drive a relay, with an on-board protection diode with an opto-isolated triac (off-board, also requires a limiting resistor) with a small / low-current DC motor, again with on-board protection diode The positive output is connected to PWR, not 3.3V, to allow for higher-power use (and a louder buzzer). Configuration¶ There are no switches or jumpers to configure, but you must choose which components to add.
I2C Color Sensor [SEN60256P. Can you tell me what is maximum detection distance?
Is it just 2-3 cm, or more, like 15-20cm ? Hi~It seems difficult to work in 15~20cm,This sensor will be out-of-true when you work in a long detection distance.I suggest that this color sensor work in less than 5cm.have a happy day~ Answered by Wei Chan | 2013-07-18 Was this useful? What does the INT pin on the right of the Grove connector does? Hi~you can use the cable to connect this grove with the base shield.( or you can link the grove SDA to A4, SCL to A5. I2C Bus Opto Input, 30V, PCF8574A [I2C-IN830SA] : ERE, Electronics Store,Embedded,Modbus,I2C boards. Description: This is an optocoupler I2C board. It is a board for remote 8-input expander for I2C bus based on PCF8574A.
Making it ideal as an isolation input expander for I2C bus. It is designed to compatible with almost 3.0V to 5.5V microcontrollers. The PCF8574A is the I2C bus expander chip which talks to microcontroller and then reads status of input voltages from optocouplers. It supports 100kHz bus frequency. The board has an interrupt output signal. LIDAR-Lite by PulsedLight. The founders of PulsedLight, Bob Lewis and Dennis Corey, recognized that there was an unmet need for an optical distance measurement sensor technology that addressed applications where a very small, low-power, high performance, reduced cost optical ranging sensor was required, such as robotics and UAVs.
So in 2011 they co-founded PulsedLight, LLC in Bend, Oregon to bring their vision for a new optical ranging sensor technology to market. After more than two years of work, we are ready to introduce our technology in the form of the LIDAR-Lite, a very small form factor, optical distance measurement sensor capable of measuring out to 40 meters using inexpensive, off-the-shelf, electro-optical components. First, a Little Science All optical ranging sensors use the principle of “Time-of-Flight” (ToF) to calculate distance to a target.
Simply put, ToF calculates the time it takes for a signal, light in this case, to travel from the sensor to a target and back to determine distance. The JeeLabs Shop - Input Plug. The Input Plug is a small board containing a CD4067 16-channel analog multiplexer plus a dedicated ATtiny microcontroller to take care of channel selection. It allows you to connect up to 16 analog inputs to a single AIO pin on any port. There is an “InputPlug” class in the JeeLib library to interface with this board and perform the channel selection. This board can also be used as 16-channel digital input multiplexer, and even for digital outputs or PWM – with the restriction than a channel goes into high-impedance mode when not selected (there is no latching or buffering). The Pre-assembled version comes with the SMD-sized CD4067 and ATTiny chips and decoupling capacitor already soldered onto the board.
This plug has 16 I/O channels, available via three 6-pin headers. The PCB only variant contains just the board for the Input Plug. The documentation and full design details are freely available. Weight Sensor (Load Cell) 0-500g - Sensor - Load Cell. Grove - Electricity Sensor - Sensor - Current. Shop - Sensors - Current - Buy Analog Voltage Divider. The Voltage Divider can detect the supply voltage upto 25V. The DFRobot Voltage Divider module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is up to 5V, so voltage detection module's input voltage can not be greater than the 5Vx5 = 25V. Specification Type: Analog Input voltage (DC): Maximum 25V, Minimum 0.0245V Detects the supply voltage upto 25V 3 Pins JST interface module Document.
Photo interrupter (OS25B10) - Infrared - Sensors - Shop. Just one week after the fire: e-Health and Distributor Orders already Shipping!! Read more. ArduIMU Sensor Board - Six Degrees of Freedom (Daughter) - Sensors - Motion. The Arduino-compatible IMU is a project by Chris Anderson and Jordi Muñoz to create an AHRS (attitude heading reference system) for UAV control and general motion capture.
This is the daughter board for the ArduIMU 6DOF. By itself, this board works as a very small single axis gyro breakout board. This board can be connected to an ArduIMU 6DOF main board to add an axis of angular velocity data. The ArduIMU 6DOF daughter board comes equipped with a LISY300AL, a single axis, ±300°/s range gyro. Shop - Sensors - Buy Hall-Effect Sensor.
ACS712 Low Current Sensor Breakout from nicegear - New Zealand's open source and VoIP hardware specialist. $23.00 Inc.
Optical Fingerprint Sensor. Safety Beams - Automatic Door Safety Beams Sensor. Automatic Door Sensors - Microwave Motion Sensor series for almost all automatic door opener application. Optical Fingerprint Sensor.