background preloader

Arduino

Facebook Twitter

ArduinoExpertCanCapteurCourantACS7145A. Electronique | @JMR. Récupérer la téléinformation avec un arduino | Blog de C-quad. Depuis longtemps j’avais envie de pouvoir suivre ma consommation électrique, sans jamais avoir vraiment franchi le pas. Il existe bien des solutions toutes faites qui permettent de suivre cette consommation via par exemple une pince ampèremétrique, mais j’avais envie de le faire moi même. Cela pour plusieurs raison : Envie de monter en compétence sur ce formidable ArduinoQue cela ne me coute pas trop cher (moins d’un euro l’opto-coupleur + l’arduino qui va servir à autre chose)On est tellement fier quand on a réussi quelque chose fait maison Pour ceux qui ne connaissent pas encore l’Arduino, je vous conseille d’aller faire un petit tour sur le site du projet Il s’agit d’un petit circuit imprimé complètement open-source disposant d’un microcontrôleur facilement programmable.

La téléinformation Les compteurs EDF de type électronique possèdent deux bornes (I1 et I2) qui émettent un signal modulé sur 50Hz. Le schéma et l’arduino Et avec ce petit bout de code : Logiciels utilisés :

Programming logiciel

Ardublock. Capteurs sensors. Current Sensor | Modern News. There are a number of ways to sense electrical current — and all of them involve some fuss, at least in comparison to sensing voltages. The chief reason for this is that because current is a flow, rather than a potential (like voltage) we need to measure it in series with the circuit, rather than in parallel.

For beginners, this is the reason that your multimeter behaves so much differently when you switch it into the current ranges. The resistance of the meter is now very low, as it is meant to be inserted in series with a circuit. Consequently if you inadvertently touch a voltage source with the probes, it is like applying a short circuit to the voltage, and the protective fuse in the meter blows out, something that is easy to do by the way, and that I’ve done at least once with all of my meters. Another popular way of sensing current, is to insert a low value resistor in series with a circuit and measure the voltage drop across the resistor.

The sensor is ready to go and in the shop. Roving Networks | Home. HomePage.