background preloader

Senzors for HA

Facebook Twitter

Automatic Cupboard PIR Sensor Switch £23.04 - Accessories for LED Lighting Products. CP Electronics - energy saving controls for lighting, heating and ventilation systems, PIR presence detectors, Microwave sensors, automatic timer systems, time lag switches. 240Vac Mini PIR Motion Detector Module (PIR415) The PIR415 fully assembled mains powered mini PIR Motion Detector module provides automatic day/night identification, adjustable light sensitivity (3-2000 Lux) and ON-time (5 Sec-8 Min). 8m detection range.

240Vac Mini PIR Motion Detector Module (PIR415)

Ideal for incorporating into other systems. Features240Vac mains powered versionautomatic day/night identificationlight sensitivity and ON-time adjustablefor building-inSpecificationsdetection angle: 100°detection range: 8m (@22°C)rated load: 800W resistive load, 150W fluorescent load (180~240VAC)power supply: 180~240VAC/50-60Hzworking temperature: -10°C~+40°Cworking humidity: <93%RHtime-delay switch: 5 s, 30 s, 1 min, 3 min, 5 min, 8 minlight control: < 3 Lux to 2000 Luxdimensions:visible part: 22 x 10mmhidden part (controller): 55 x 25 x 35mmweight: 41gProduct format: PRE-ASSEMBLED Electronic Module moreUser Guide. Pohybová čidla od 107,- - Zboží - Veľkoobchod s elektroinštalačným materiálom - EL-BAU, spol. s r.o. NIKO; NIKOBUS; VENTILÁTORY, VIDEOVRÁTNIKY COMMAX; Valena; Galea. Pir snímač / BOSCH DS936 [04517727] - 39,90€ s DPH : Alarmy. Duálne snímače PIR/PIR, PIR/MV - ALARMY s.r.o. Alarmy-kamery montáž,servis,predaj.

Infrapasívne detektory pohybu PIR - ALARMY s.r.o. SEGA Audio s.r.o. Com - Comparison Table. Texecom Prestige DT. NVR so zabudovaným PoE Hikvision Picadis HiWatch Vážení zákazníci, ak máte záujem plne využívať možnosti našej webstránky, zaregistrujte sa prosím.

Texecom Prestige DT

Registráciou získate prístup k cenníkom a dokumentácii. Ak ste firma alebo živnostník registrovaný v oblasti zabezpečovacej a kamerovej techniky, budete môcť priamo objednávať tovar s cenami platnými pre Vašu firmu. Copper s.r.o. - Elektronické súčiastky a prístroje. Výsledky hľadania služby Google Image pre. Short overview This site has three major parts.

Výsledky hľadania služby Google Image pre

The first part describes the hardware components of the BTnodeRFID reader with assembly instructions. The next part specifies its power consumption. The last part shows a packaging of the BTnodeRFID reader suitable for mobile phones. Hardware components The BTnodeRFID reader consists mainly of two components: the BTnode and the SkyeModule M1-mini.

BTnode The BTnode is an autonomous wireless communication and computing platform based on a Bluetooth radio and a microcontroller. BTnode features at a glance: Microcontroller: Atmel ATmega 128L (8 MHz @ 8 MIPS)Memories: 64+180 Kbyte RAM, 128 Kbyte FLASH ROM, 4 Kbyte EEPROMBluetooth subsystem: Zeevo ZV4002, supporting AFH/SFH Scatternets, BT v1.2 compatibleLow-power radio: Chipcon CC1000 operating in ISM band 433-915 MHzExternal Interfaces: ISP, UART, SPI, I2C, GPIO, ADC, Timer, 4 LEDsStandard C Programming, TinyOS compatible. MODULE M1 MINI W/SPI - SM-MN-00-HF-RCSPI. SENSOR 30. Dexshop.sk. Detektor pohybu. Dverový spínač. Pir sensor module,infrared sensor switch,LED sensor lighting - Shenzhen Nodav Technology Co., Ltd. Www.iqmarket.sk/files/products/doc/cybrotech/LRI8134-datasheet.pdf.

Spínač SENSOR- SWITCH » T-LED eshop. Sterreich ... einfach besser! HF mikrovlnný spínač,spínač pre senzorové svietidlá. KNXshop - ZENNIO Motion Sensor (ZN1IO-DETEC) from ZENNIO. Automatic Emergency Light Testing. Traditionally, emergency light testing was performed by maintenance personnel using a key switch to manually activate the light test.

Automatic Emergency Light Testing

At the end of the test duration a visual inspection was made of each lamp to confirm it had not failed. This labour intensive process has now been simplified and superseded by the use of KNX and DALI solution. Recent developments in DALI electronic control gear (ECG's) means KNX can automate this process allowing whole buildings to be automatically scheduled for an emergency light test and any failures in lamp or ECG are reported back to a "head-end", the Build Management System (BMS), documenting which fittings have failed and why. There are currently 3 types of test are available. Functional test -- 30 second test to confirm the DALI ECG is operational Short duration test -- 1hr test with the ECG running on emergency supply Long duration test -- 3hr test with the ECG running on emergency supply.

Product List. Pohybové čidlá, senzory, HAGARD:HAL, a.s.

Senzory pritomnosti

Www.lighting.philips.com/pwc_li/main/subsites/dynalite/products/assets/pdf/sensors.pdf.