background preloader


Facebook Twitter

Raspberry Pi Zero W and Pi Camera Application – Tutorial by Cytron. How to use a Raspberry Pi to remotely watch your home. For this Raspberry Pi project we'll create a remote monitor for tracking activity in a home. Before we begin, make sure that your webcam is plugged into your Raspberry Pi. To update our system and install the webcam motion software, you'll need to open XTerminal and type: $ sudo apt-get update && sudo apt-get install motion With motion installed let's configure it with: $ sudo nano /etc/default/motion You'll see start_motion_daemon=no change this to yes.

Now press Ctrl+o to save and Ctrl+x to quit. Daemon on width 640 height 480 framerate 100 stream_localhost off Reboot your Raspberry Pi before continuing. Now in a browser on another machine type in the IP address of your Raspberry Pi, you can find this in the terminal by typing hostname -I followed by :8081 so for example my IP address was You should now see a video stream in your browser. Open the text editor on your Raspberry Pi. Puppy/Baby Monitor ## I wonder what the dog/baby is up to? Src=" script> RPi-Cam-Web-Interface - RPi Cam Web Interface is a web interface for the Raspberry Pi Camera module.

It can be used for a wide variety of applications including surveillance, dvr recording and time lapse photography. It is highly configurable and can be extended with the use of macro scripts. It can be opened on any browser (smartphones included) and contains the following features: View, stop and restart a live-preview with low latency and high framerate. IMPORTANT NOTE: This is for the Raspberry Pi camera only.

It does NOT support USB cameras. It's been programmed by silvanmelchior as a client for RaspiMJPEG in 2013. Remember, anyone can create an account on here and add to this wiki. Basic Installation Warning: The installer will replace various files, so backup all your data. See also Addition section for tips on installing from scratch. sudo apt-get update sudo apt-get dist-upgrade Step 4: For Jessie Lite run sudo apt-get install git The scripts are After the setup finishes it offers to start the camera system. . #! 5 façons de faire du streaming vidéo avec un Raspberry Pi.

Le module Raspberry Pi Camera (et la version sans filtre IR, le module NoIR) sont de petits circuits (2,5cm x 2,5cm) dotés d’un capteur photo de 2592 x 1944 pixels capable d’enregistrer en 1080p à 30 images par secondes (ou 60 fps en 720p). Ce module se branche directement sur le port CSI du Pi prévu à cet effet. La version NoIR permet de voir les infra-rouge, ce qui autorisera une vision nocturne si on le couple à un projecteur infra-rouge comme expliqué à fin de cet article : Système de vidéo-surveillance abordable avec des Raspberry Pi Que ce soit pour un système de vidéo surveillance ou pour le pilotage d’un robot à distance, il faut pouvoir récupérer le flux vidéo et le diffuser à travers le réseau (streaming).

Nous allons voir dans cet article 5 méthodes pour diffuser le flux vidéo d’un module Raspberry Pi Camera, plus ou moins efficacement. Le matériel Pour l’ensemble des méthodes exposées dans cet article, nous utiliserons le matériel et le montage suivant : apt-get install vlc. 3. Quick Start — Picamera 1.0 documentation.