background preloader

Impresoras 3d

Facebook Twitter

Driving 28BYJ-48 step motor with Pololu A4988 drivers. I have always liked the 28BYJ-48 motor because of its power and price, it also supposed to very reliable since it is used in different types of air conditioners.

Driving 28BYJ-48 step motor with Pololu A4988 drivers

Some information about the motor: This motor is very small but has enough power for most of the projects because it has a built-in 1/64 reduction gear. The result is a very small step of the motor which is 0,087890625 degrees per step. The reduction gear of course has its downiside which is the speed – you can typically drive this motor with maximum frequency of 100Hz which result in 100 steps per second which is 8,7890625 degrees per second. Laser cutting and engraving – design, make & build your own products with Ponoko. 20 Amazing Creations You Can Make With 3D Printing - Hongkiat. If you can print in 2D, can you print in 3D?

20 Amazing Creations You Can Make With 3D Printing - Hongkiat

Well, the technology is already here. Italian 3D-Printing Company Creates Unique Furniture Combining Traditional Craftsmanship & 3D Technology. Italy is quickly emerging as a competitor in the global 3D printing market in no small measure thanks to one company, 3DiTALY.

Italian 3D-Printing Company Creates Unique Furniture Combining Traditional Craftsmanship & 3D Technology

One of the company’s founders, Antonio Alliva, and his design team showcased 3DiTALY’s latest project in late April at Milan Design Week, truly an important world stage for all things furniture. One of the primary goals of 3DiTALY is to explore the potential for combining 3D scanning and printing technology with traditional furniture design techniques, and the project, titled “Eggform,” did just that. 3DiTALY, which began a decade ago as a kind of experimental laboratory, offers a wide range of services, including workshops, labs, a retail and exhibition space in Rome that invites visitors to explore 3D printing. Cults ・ Buy and sell 3D models for 3D Printer. Lite6 - A high quality, low cost HotEnd for everyone. Posted On: 2015-04-01 13:32:47 ; Read: 403 time(s) Introduction.

Lite6 - A high quality, low cost HotEnd for everyone

Hypothetical workshop. GrabCAD. FabLab Maastricht video interview - PlugnMake. FabLab Maastricht specializes in 3D printing research.

FabLab Maastricht video interview - PlugnMake

Its aim is to make both tools and materials as affordable as possible. To do that, they avail themselves of the collaboration with companies, universities and research centers. 21-year-old Floris Hoff managed to build his own company, byflow, thanks to the experience acquired within the FabLab. byflow is a foldable 3D printer with interchangeable nozzles, which allows you to print a wide range of materials through a user-friendly interface. Frits Hoff, manager of FabLab Maastricht, told us about the research lines conducted in the Lab, and about the adopted policies of financing and sharing. About - Contraptor. Ramps1.4. Introduction Ramps is short for reprap Arduino mega pololu shield, it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board).


Ramps can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3Dprinter (all reprap-model such as pursa i2 and i3). The combination of Ramps1.4+MEGA2560+A4988/DRV8825 is becoming a mainstream of DIY 3D printer control board.

Features 1. 2. 3 MOSFET 3 MOSFET are applied to the heater/ fan and thermistor circuit. 4. 5. 6. 20 Amazing Creations You Can Make With 3D Printing - Hongkiat. Laser cutting and engraving – design, make & build your own products with Ponoko. Build a 30$ laser Scanner. Here is the list of all the parts you need to build the scanner: · A bunch of M3 (16 and 20 mm) · A bunch of M4 (12 and 20 mm) · 1x Arduino nano (Chinese copy, $4)

Build a 30$ laser Scanner

Become a Partner. Reprap development and further adventures in DIY 3D printing: MENDELMAX - Quick-fit X and Quick-fit Extruder/s. Back in October I started on a number of MendelMax builds.

Reprap development and further adventures in DIY 3D printing: MENDELMAX - Quick-fit X and Quick-fit Extruder/s

Time passes I got distracted by Christmas (and the excellent Slic3r) New Slic3r 0.7.1 out NOW! It has been a really amazing period from October-Feb with so many new machines being released into the community, my own needs and desires for the 'perfect' machine are now starting to materialise. MendelMax isn't 100% perfect, but it's the best machine I have built to date - and I really like it. MendelMax. I have now been using a 'finished' MAX for the last 6 weeks, It's really great, and easy to hack with, I have already upgraded quite a few parts and built a whole new X Carriage concept based on using the MAX for a while.MendelMax Created by kludgineer - the files and many derivatives can be found on Thingiveres Here - I have added links to my changes below - I built up a frame concept back in 2010 out of 20mm Extrusions, but it never got past this picture - It would have been an interesting machine.

Complete newbie step by step, 3D printer with all parts lists. Intro, prelude, or just: who is this meant for?

Complete newbie step by step, 3D printer with all parts lists

I wanted the title to include cheap, but lets face it: it is not cheap to build a 3D printer unless you have some/most of the components on hand or if you find just shy of £100 as cheap to make a tiny, not very good quality printer. This tutorial is all about starting from zero, figuring out and understanding all parts of a 3D printer and keeping costs down for this our very first build.

The upside is that all the items can be reused for a larger better printer at a later stage. I did that, and it Works wonderfully - better than an Ultimaker original in fact (proud).It should be obvious which one is made from old CD/DVD drives, and which one I reused my parts in later :) I opted for a small printer, but you can just ordre longer metal rods and get a larger cabinet, and you have a larger printer at the same cost.

I have not kept strict tabs on costs, but the final printer, which is awesome, amounted to a total of just over £200 or so. Combination CNC Machine and 3D Printer. How to make your own 2D CNC machine that converts into a 3D Printer and back to a CNC machine in less than an hour.

Combination CNC Machine and 3D Printer

Costing less than a CNC machine or 3D printer! (~$1,000.00) In addition, the design will go further than the traditional 3D printer printing ABS/PLA, and move forward to printing with new materials such as 3D Printing Nylon derivatives like tauman 618 as well as Acrylic and PET. Latest Updates to this Instructable as of 9/12/2012: 1. Make Your Own 3D Printer Filament with the ExtrusionBot. There have been several attempts at developing a practical filament-making machine.

Is ExtrusionBot the one that succeeds? We’ve looked at a few similar devices and found most of them to be impractical for various reasons, not the least being quality of output. In today’s personal 3D printers (at least the plastic filament-based ones) the quality of input filament is critical. It must have highly consistent diameter, no air bubbles, consistent coloration, consistent chemistry for strength and be non-toxic. Any usable filament maker must be able to produce those results or it won’t be worth your trouble. Let’s take a look at the ExtrusionBot, said to be “The world’s fastest filament extruder”. Mr Beam - a Portable Laser Cutter and Engraver Kit by Mr Beam Lasers. With the Mr Beam kit, you can build your own laser cutter and engraver. Explore new ways to express your creativity: Cut your own designs from paper, adhesive foil (custom stickers!) Or other materials with the power of light. CAD to 3D. DeltaTrix 3D Printer. Under Revision: This Instructable is being updated to reflect the latest version of the DeltaTrix 3D printer, as produced for my Kickstarter project.

Until this message is removed, the update is still in progress. The entire previous version is still available in the form of a PDF (actual instructions + pictures) and a rar file (all other files). See below for the PDF and rar file. The current state provides sufficient information to build up a printer from a Kickstarter kit, but not yet enough for building up the latest version from scratch.

The DeltaTrix 3D printer is a capable and novel 3D printer, designed to be simple in construction, yet effective in functionality. Many thanks to Barrie for doing the video! Several improvements have been made since creating the initial printer. A tiny Arduino laser cutter. The basis for Groover's axis was the two mini stepper motors from the DVD-RW drives.

The motors drive the DVD head mechanism which either moved the laser cutting head, or the cutting table. My first starting point was to find a similar set of motors, and a reclaimed laser diode. However I wanted a slightly different design. Where Groover has the cutting table move on the Y Axis, I wanted a fixed cutting table. To do this I took my inspiration from a gantry crane. As the cutting table would be fixed, the cutting head must move along the Y Axis instead, but it must also accommodate the X Axis. Arduino Laser Engraver.

I started this project because I wanted to make something that had mechanical, electrical and software components. After looking around on Instructables, I figured that an Arduino based laser engraver would be an interesting machine to make, and that the machine itself could make interesting things. Laser diodes have also advanced quite a lot in the last few years, allowing reasonably powerful DIY laser engravers to be made without the hassles of laser tubes. This machine can engrave wood and cut paper. Arduino 3-axis Mini Lazer Paper-Cutter.

Updated : 16/3 Add step 4, about using the stage. Updated : 18/3 Add photos (cutting vinyl adhesive sheet) Updated : 19/3 Add step 5, acting as pen plotter Updated : 20/3 Add laser engraving video (Wood) and photo Updated : 22/3 Add 2 drawings to show the structures of machine, also visit this link. CNC Panel Joinery Notebook. Build Your Own Beautiful Flat-Pack Chair. 3D Printed House In Amsterdam. Ranking de 10 cosas increíbles que puedes hacer con las impresoras 3D. 8. 3DPRINTCANALHOUSE by DUS Architects.

Work begins on the world's first 3D-printed house. Una empresa china fabrica 10 chalets adosados en 24 horas, con una impresora 3D. La empresa china Winsun New Materials ha construido 10 chalets adosados en solo 24 horas, usando la tecnología de impresión 3D, una técnica que últimamente no deja de darnos sorpresas. Las casas, de una planta, fueron fabricadas usando materiales de desecho, que fueron colocados en capas. La fabricación de cada una de ellas costó unos 3.500 euros, informa la agencia china de noticias Xinhua. 3D Printing Construction - English. +Project. In the north of Sweden, a constellation of industrial and academic partners are about to start a three year journey to build a wooden house using additive manufacturing, and to work with the aim of making Norrland a leading region in the field of innovative and sustainable construction.

In writing a recent national innovation agenda for additive manufacturing [1], a process led by Umeå University, it was concluded amongst other things that Sweden, a nation of early adopters with rich natural resources, has excellent potential to lead the development of software for digital fabrication, design of and for new digital fabrication methods as well as the development and production of new mineral and bio-based pastes and powders for additive manufacturing. World's first 3D-printed apartment building constructed in China. Un robot imprimirá un puente de acero en Amsterdam. Una start-up holandesa quiere construir el primer puente impreso en 3D sobre un canal de Amsterdam, una técnica excepcional que podría convertirse en norma en construcciones de riesgo, anunció la compañía.

La empresa de ingeniería civil MX3D pretende utilizar impresoras robóticas que diseñan estructuras en acero en 3D: "esos robots son distintos, porque pueden imprimir, sin límite de tamaño, plataformas de construcción como las impresoras 3D tradicionales", explicó a la AFP la portavoz, Eva James. Esos robots, que disponen de largos brazos, "caminarán" a través del canal deslizándose de un lado a otro del puente, imprimiendo sus propias estructuras de apoyo mientras se desplazan por el aire. Creados para ese proyecto, los robots calientan el metal a una temperatura de 1500 grados centígrados para soldarlo y montar la estructura gota a gota, utilizando un programa que preparar los diseños.

MOTF.AE. Construirán en Dubai parte de un museo usando una impresora 3D. Impresora 3D gigante para construir casas en 24 horas. Dubai to build world’s first 3D printed office. 3DPRINTCANALHOUSE by DUS Architects. Construyen una casa en Amsterdam con una enorme impresora 3D.