BeagleBoardDebian. This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle. If you need any help: When asking for help, please provide some debugging information: U-Boot Version installed on board Kernel Version: uname -a pastebin dmesg Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit) Mainline U-Boot: All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
Scripts: git clone cd netinstall Device Options: You will need a 1GB SD card or greater. Standard System : ~455MB + Desktop environment (GNOME) : ~2.9GB Debian Wheezy Quick Install script for "board" sudo . So For the BeagleBoard xM: sudo . Options: --firmware : installs firmware--serial-mode : debian-installer uses Serial Port Debian Stable (wheezy) sudo . . . . Digia launches Boot to Qt technology preview · LinuxGizmos.com. Digia launched a technology preview of Boot to Qt, a commercial offering that provides “a fully-integrated solution for the creation of slick user interfaces on embedded devices.”
The current version of Boot to Qt is built on top of an Android kernel base layer, and includes support for the Nexus 7, BeagleBoard-xM, SABRE Lite, and x86 hardware. Boot to Qt “offers an elegant means of developing beautiful and performant embedded devices,” says Gunnar Sletta, Digia principal engineer, in post on Digia’s blog. According Sletta’s post, the Boot to Qt project provides… A lightweight UI stack for embedded Linux, based on the Qt Framework Ready-made bootable images, which include the Boot to Qt stack, for several different devices Full Qt Creator integration, which enables one-click deploy-and-run on hardware, and a fully featured development environment. More specifically, Digia claims the Qt-based graphical layer provides the following advantages over Android’s corresponding components:
BeagleBoardUbuntu. (For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?) This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone. For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard. If you need any help: Ubuntu related help: #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)When requesting help, please provide some debugging information: U-Boot Version installed on board Kernel Version: uname -a pastebin dmesg Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit) Mainline U-Boot: boot.scr/boot.cmd changes: With 2.6.35: sudo . . .
Ubuntu for BeagleBoard.