3D Printing - MakerBot Replicator Prints a Plastic Bust of Stephen Colbert. I just stopped by MakerBot's far-flung booth somewhere in the back caverns of CES (I believe it may technically be in Arizona) to check out their new Replicator 3-D printer. Check out the video below--pretty sure that's a bust of Stephen Colbert being slowly brought to life with swirling circles of molten plastic. The Replicator is the newest MakerBot, a relatively inexpensive 3-D printer that can print in either ABS (the same plastic LEGO uses) or PLA (a corn-based bio-material).
This version is much bigger, capable of printing objects 9 x 6 x 6 inches in size, and has a "dual extrusion" mode to print two-colored objects, a first for MakerBot. It also ships fully assembled; previous MakerBots required the end user to construct them at home, which is described as being about as difficult to assemble as a piece of furniture from IKEA, so there's that little inconvenience taken care of.
Microsoft Surface 2. Interactive game book. LG begins mass production of first flexible, plastic e-ink displays. LG, that South Korean conglomerate that has mostly spent the last few years fading into Samsung’s shadow, has just announced that it has begun mass production of the world’s first flexible, plastic e-ink display. This is opposed to the hard, heavy, prone-to-cracking glass-laminate e-ink displays found in devices such as the Kindle and Nook. The new plastic display has a resolution of 1024×768 and is six inches across the diagonal, which is comparable to the Kindle and Nook.
Because it’s made of plastic and not glass, though, the LG display is half the weight (14g) and 30% thinner (0.7mm) than a comparable, glass e-ink panel. Existing e-book readers need to be thick (and heavy) to protect the glass display, but LG is promising that its display is a lot more rugged. The press release says that the plastic display survives repeated 1.5-meter drop tests and break/scratch tests with a small hammer, and that it’s flexible up to 40 degrees from the mid point. [Image credit]