Laser engraver

A Video from the making of a Laser Engraver. Most downloaded models. 2x:2.x_laser [Buildlog.net Wiki] Introduction The Buildlog.net 2.x laser is a second generation DIY open source laser cutter engraver.

The name comes from the fact that this is the second generation machine and it is basically a 2 axis design. The third, vertical axis, is manually controlled with an optional upgrade to digital control. The 2.x Laser takes all the optimizations learned from the first laser and all the other lasers documented on buildlog.net forum. The quality of the laser exceeds most Chinese eBay lasers. Kits Page Where is the full kit? Click here for the Design in STEP Format The laser is fully open source with all drawings, bills of material and sources of supply very well documented. Sources For Parts Kits From Buildlog.net While the design is documented well enough to build it completely by yourself, many people do not have the the necessary fabrication tools and/or skills to do it themselves. The skins and windows kit ship by themselves in a special wooden framed create. Assembly Setup. CNC Laser Gravierer [der-frickler.net] Es handelt sich um einen Laser der Klasse 3B: Die zugängliche Laserstrahlung ist gefährlich für das Auge und in besonderen Fällen auch für die Haut.

Bitte nicht ohne Entsprechende Schutzmaßnahmen/Schutzbrille verwenden. Laser Gravierer V4 So, es ist endlich soweit! Nachdem ich vor über einem Jahr im Winter begonnen hatte den Lasergravierer v2 zu bauen, lag dieser dann den ganzen Sommer fast fertig in der Ecke. Es wurde wieder Herbst und ich wollte das Projekt noch einmal angehen. Von einem netten Mitflieger bekam ich eine Alte Holz-Kiste die wohl Jahrzehnte einen großen Nadeldrucker in der Werkstatt beheimatet hatte.

Vom der Aufwendigen Elektronik des v2 bin ich wieder abgekommen. Die ersten Tests schauen wirklich gut aus, der 1.6W Laser schneidet 3mm Sperrholz mit 3 Durchgängen a 100mm/min. Verbaute Teile Bilder Laser Gravierer V1. Igor !! IT'S A LIVE !!! This Frankenstein Laser Cutter was built out of an old scanner and printer.

The whole thing evolved around the instructable of Groover and his 'Pocket Laser Engraver'. This is a Making-Of. Although, a lot (if not everything) of the mechnical construction requires ingenuity but I tried to document the complete build process as much as I could. Every scanner's and printer's mechanic is different so this can not be used as a step-by-step guide. It's more of a "how it can be done"-guide. When I started I had absolutely no clue about electronics. I have learned a lot in this project. So enough talk. The working area is 270mm x 200mm. It is able to cut : foam rubber tape vinyl paper (nearly every color but white/red) several plastics (could require several runs depending on thickness) It can engrave: light wood (Balsawood/Poplar) leather bone horn plastics some varnishes blank cds/dvds (purple/blue) The color is quite important.

Laser safety glasses 50 € New total100 €