background preloader

Fun

Facebook Twitter

How To Make A Kite - 27 Kites! Fully Illustrated Step-By-Step Instructions. 27 Kites!

How To Make A Kite - 27 Kites! Fully Illustrated Step-By-Step Instructions.

Step-By-Step Instructions If you want to learn how to make a kite or two, you have definitely come to the right spot! Perhaps you have made plenty, but are always on the lookout for more designs and ideas. In any case, some of the most popular single-line designs being flown in the Western world are covered here. Who hasn't seen a Delta - and it's not too hard to make your own!

For example, there's the quick and easy Sled. The Barn Door is uniquely American. All the designs have been well-tested! (Note: MBK Skewer Kites are made from thin 12" bamboo skewers, which come in packs of 100. The emphasis here is on very cheap materials. Not only that, but hardly any tools are required. Learning how to make a kite from bamboo skewers or dowel and plastic is fun and they do fly really well!

In addition, there are three Box kites. These all fly well in moderate winds, and the 2-Skewer design can cope with much stronger winds as well... The original 2-Skewer Delta. How to Make a Traditional Kite. This is a pretty traditional kite.

How to Make a Traditional Kite

We have all seen this kind. It is easy to make and you can probably do it in half an hour. It only takes a few materials and you can improvise and use a variety of things depending on what you have. I have used a plastic trash bag but you could use newspaper. I also have a video tutorial on how to make this kite at the bottom of this page. If you like kite making I also have a more challenging tutorial on how to make a box kite.

OK, Let's Make This Kite This picture shows the materials needed to make this kite. A Plastic bag or newspapers Two sticks 1/4" square is perfect, 1/4" round is good too One stick is 36 inches long and the second is 33 inches long Masking tape Scissors String for flying and for building the kite A little saw or small knife for notching the wood some strips of cloth about 2" wide and a one foot long That's everything, you don't need a lot of stuff to make this kite. Watch the orientation of the notches on the ends of the wood. How to Convert an Old TV Into a Fish Tank - wikiHow, the free how-to guide. 10 Really Cool DIY Gadgets That Will Take You no More Than 5 Minutes. Do-it-yourself is a popular topic online: there are hundreds of tutorials and how-tos.

But most of them are too hard to replicate and require too much time, effort and skill. This collection shares 10 cool things you can do at home with no more than 5 minutes spent: great ideas for DIY gifts and fun gadgets. Enjoy! 1. Old TV Book Shelf Looking for some home decor inspiration? Estimated time needed: 3 minutes (to find the old TV in the garage) 2. This one will come particularly in handy during these long winter romantic nights! Estimated time needed: 2 minutes (to cut the plastic) 3. More great candle holders now: take a couple of old CDs, put them in a microwave oven for some time (no more than a couple of seconds) and add nice candles. Estimated time needed: 10 seconds (provided you have nice candles) 4.

The concept is the most important here, not the material. Estimated time needed: 20 seconds 5. This one is probably the hardest of all but still easy… and so much fun! Thing in a Jar - StumbleUpon. Thing in a Jar 7 inches by 4 inches, mason jar Pictured above is the Thing in a Jar that's usually sitting in my office at work.

Thing in a Jar - StumbleUpon

The coolest thing about the Thing is that everyone responds to seeing it by asking questions. Where did I find it? Is it an internal organ? The Thing in a Jar is made out of Sculpey, acryllic paint and rubber cement. This is the third Thing in a Jar I've made. Here's a conceptual sketch I made of this Thing before I sculpted it. 1.5 by 2.5 inches, ballpoint pen Usually when I make a Thing in a Jar, I try to keep the shape ambiguous enough so that the viewer cannot really pin down exactly what they're looking at. The glass jar acts as a physical barrier, preventing the viewer from directly accessing its contents. I think this is much cooler than, for example, a painting, which basically has this big implicit sign hanging off of it that says, "I am just a painting of an object, not the object itself.