Ball Jar Lights I’ve been wanting to do this for a year. It’s one of those things I’ve just been putting off. I love ball canning jars, especially the blue ones. The first thing you have to do to make the Ball jar lights, is take out the glass seal. So I took the hammer and busted up the seal to get it out. Once the seal was out, I marked the center of the lid. And used the drill bit and a hammer to poke a hole where the mark was. Then we started drilling. It only took a few seconds since the lid is so thin. I bought 2 recessed light converters years ago from Lowe’s (I think). This is what the shade originally looked like. I thought these little round bulbs would look the best with the ball jar lights. Then I just screwed the jar onto the lid. I love how it looks. I made one for over the sink too. I know these have been done all over the place, but it’s something I’ve been wanting to do forever and I’m glad I finally did. And a side note: I’ve always wondered how high lights should be hung over an island.
How I built an electricity producing Solar Panel Several years ago I bought some remote property in Arizona. I am an astronomer and wanted a place to practice my hobby far away from the sky-wrecking light pollution found near cities of any real size. In my attempt to escape city light pollution, I found a great piece of remote property. The problem is, it's so remote that there is no electric service available. That's not really a problem. No electricity equals no light pollution. I built a wind turbine to provide some power on the remote property. Here is a video of the solar panel set up and in use on my remote, off-grid property. Let me state up front that I probably won't be able to help you out much if you decide to build your own solar panel(s). So what is a solar panel anyway? I started out the way I start every project, by Googling for information on home-built solar panels. After a while, I came to some conclusions: <a href=' seller. A solar panel is really just a shallow box.
JADERBOMB - How to cut glass I posted a picture about 1 week ago on Instagram, Facebook and Twitter of me cutting glass using just string. I got LOT’S of requests for a tutorial on how I DID THIS! So here it is. I want to warn you. It’s best to triple your yarn because it will burn longer! Soak it GOOD! I like to tie my yarn where I want my glass to “cut” then quickly pour polish remover over the string again. Get a big bowl with ice and water ready. VERY IMPORTANT! Slowly turn your bottle. You can’t let the flame go OUT then dunk it in the ice water. YAY!!! I reallly hope you enjoyed this tutorial because I had ALOT of requests for it! © Copyright jaderbombllc, All rights Reserved.
DIY Home Improvement Advice, DIY Help, How To Tips, Do-It-Yourself Wine Bottle Design | Recycled Wine Bottle Torch | Package Design Firm | Sustainable Packaging 08.09.09 | by Erik Anderson Whether it’s product branding, package design or projects for ourselves, we’re pleased when we find a solution that’s very effective and creative, while keeping resources to a minimum. This idea is very inexpensive idea and it’s a great way to recycle a wine bottle. See how this simple idea inspired this brand and wine bottle design. It’s been a record year for mosquitoes here in Indianapolis, Indiana and I’d been wanting to add some Tiki-esque torches to the patio to combat the little buggers, and add a little ambiance. After searching the world over to find a torch that was affordable and atypical I came to the conclusion that unless I wanted wicker or bamboo, I needed to be a bit more resourceful. Here’s what you’ll need. Empty Wine Bottle (Use any bottle as long as it’s glass and the neck is 1” in diameter. Helpful Tools: Channellocks, adjustable wrench, hacksaw, power screwdriver, and a funnel. Safety Note: This is for outdoor use only. The Hanger -Erik
How to build My 50 Dollar Greenhouse & The Door Garden First off – you really can build this thing very cheaply, but to do so you have to recycle, freecycle, and scrounge. If you just go out and buy new everything it will probably cost over $200 – still not bad all in all.This Article is featured in Jan 2010 issue of Birds and Blooms Magazine!Want to find out if this thing works before you read all this? Read 6 months in the Greenhouse first.Want to see what happens when a few inches of wet snow accumulates on this? My $50 Greenhouse Welcome Stumbleupon Gardeners! Materials list Construction Steps Hind Sight – What I would do differently The planning is over and construction on my hoop house greenhouse has begun. After some research I’ve decided to build the structure of the hoop house out of 20 ft. joints of three quarter inch PVC plumbing pipe. My hoop house green house is going to be 11 feet wide and 15 feet long, and will be about seven and a half feet tall in the center. If your Greenhouse is too Flat it will collapse! Thusly Thusly.
How To Use Excel 2007 (Microsoft Excel) A tutorial video of Microsoft Excel that gives instructions on how to use Excel and the way Excel works. This particular video shows us how to navigate through rows and columns, enter data and organize our cells. Hi, my name is Ghamza Jacobs, I'm here today just to show you a couple of little tips and tricks on Windows 7 and Office 2010.We're looking at how to use Excel right now, and basically Microsoft Excel is a very very popular spreadsheet application, used to create tables of data, used to create income statements, bank sheets, anything that you need to represent as a table. And standard to all versions of excel, of course, is you've got your columns and you've got your rows, so in your idea, I'll just select a colon over here, that's column A, column B, just some columns running from A,B,C,D all the way across. Your rows run from 1 all the way down. Your columns and rows in Excel 2007 and 2010 have been extended greatly.
Welcome to The Sietch - Projects Build Your Own Solar Thermal Panel After our first attempt at a home built proof of concept solar thermal panel, we were a bit disappointed with the results. It took about 4 hours before the thing started work, and was a bit costly (at over 50 dollars) to make. I knew it could be done better and cheaper. My first mistake with the first one was purchasing everything new. With ample reusable resources at the local town dump I knew it could be done on the cheap. Another flaw from the first panel was using pond liner as our collection medium. We solved this problem by using a ready made collector. The last major flaw in our first panel was using plexiglas for the cover. We solved this problem by using good old fashion window glass. Now onto the project. Our local dump has a coolant removal program that has refrigerators and dehumidifiers that they remove old freon from. Make sure that the freon, or other coolant has been removed, and cut the grill off at the base, near the large coolant holder. Enjoy the hot water.