Enhance your DNS and DHCP services with dnsmasq. Most home and small business networks are built using Network Address Translation and a non-routable IP address ranges. The administrator of the network simply configures each new machine with the next available IP address in the range being used (e.g. 192.168.168.*). But since these nodes are on a private network, the organization's public DNS servers don't know about them. Users of the network must use difficult-to-remember numerical IP addresses to access internal network services.
To avoid this, you can install dnsmasq and configure it to know about all of the nodes on your network, and supply that information as a DNS server. To simplify things you can also configure dnsmasq to supply each node with an IP address using the DHCP protocol. Finally, for situations where you require that a particular system has a fixed IP address, you can configure dnsmasq's DHCP server to supply that IP address based on the system's Media Access Control (MAC) or hardware address. Domain=example.com. Optware / DnsMasq browse. Dnsmasq is a combination DNS and DHCP server.IP addresses handed out to DHCP clients are automatically added to the name service.Configuration is easy. Upstream name servers are read from the configuration file. Local addresses are read from a host file ( default /etc/hosts .) DHCP address ranges and static reservations are read from the configuration file.
Installing: ipkg updateipkg install dnsmasq Configuring: edit /etc/hosts to add hosts to the dns. edit /opt/etc/dnsmasque.conf to configure all dns and dhcp settings. Dnsmasque.conf: Problems: With the oleg firmware and IPv6? Man page of DNSMASQ. Section: Maintenance Commands (8)Index dnsmasq - A lightweight DHCP and caching DNS server. dnsmasq [OPTION]... dnsmasq is a lightweight DNS, TFTP, PXE, router advertisement and DHCP server. It is intended to provide coupled DNS and DHCP service to a LAN. Dnsmasq accepts DNS queries and either answers them from a small, local, cache or forwards them to a real, recursive, DNS server. The dnsmasq DHCP server supports static address assignments and multiple networks. The dnsmasq DHCPv6 server provides the same set of features as the DHCPv4 server, and in addition, it includes router advertisements and a neat feature which allows nameing for clients which use DHCPv4 and stateless autoconfiguration only for IPv6 configuration.
Dnsmasq is coded with small embedded systems in mind. Note that in general missing parameters are allowed and switch off functions, for instance "--pid-file" disables writing a PID file. --test Read and syntax check configuration file(s). -w, --help -h, --no-hosts --dnssec. Installer Bind Sur Son Syno (Et Pourquoi) - Tutorials. Complément d'astuces et sur les difficultés que j'ai pu rencontrer, Configuration du DHCP pour le poste client : Pour les utilisateurs de dd-wrt ou tout autre routeur supportant le DHCP, j'ai utilisé l'envoi de paramètres DNS suivants : DNS statique 1 - 192.168.1.108 - IP de mon NAS avec Bind d'installé DNS statique 2 - 192.168.1.1 - Mon routeur et donc les DNS de mon FAI DNS statique 3 - 8.8.8.8 - DNS de google Je suis limité à 3 DNS dans la configuration de mon routeur, bien qu'en théorie je devrais pouvoir monter à 5.
De cette façon, 1 - Mon SYNO résoud par défaut les requêtes DNS - Objectif recherché 2 - Si le le NAS s'avère éteint ou non fonctionnel, les DNS de mon routeur (et donc ceux de mon FAI) prennent le relai 3 - Si les DNS, de mon FAI débloquent complètement, ceux de google interviennent en dernier recours. Les dns ont été configurés selon leurs performances théoriques. Problème avec 1° DNS attribué : Par défaut, le 1° dbs attribué était mon routeur et non le NAS. et non Dns .42 : Serveur DNS Bind sur Synology » Diaoul. Tout a commencé par des problèmes avec mon serveur DNS par défaut : celui de Neuf (SFR maintenant). En effet les délais de mise à jour du cache étaient beaucoup trop longs, impossible de faire une partie de League Of Legends après leur migration de serveur, pensez donc ! C’était donc une question de survie… Qui parle serveur DNS public ne saurait ignorer le fait que Google à lancé son propre service de serveurs DNS 8.8.8.8 pour le primaire et 8.8.4.4 pour le secondaire.
Oui mais voilà, j’ai une vie privée et ne souhaite pas crier à Google « Regarde ce que je fais sur internet ! ». Quelle serait donc l’alternative idéale ? Une petite bête tourne en permanence chez moi, mon bon petit NAS Synology DS-207+, il m’est donc venu à l’esprit de lui trouver une autre utilité. Rien de plus simple, il suffit de disposer d‘IPKG puis de suivre le tutoriel très détaillé sur le site de NSLU2. En plus de ce tuto, et si les logs ne vous parlent pas, lancez un petit : named-checkconf Mon named.conf La théorie. 403 Forbidden.