Profilé, câble, chaîne, tube, crochet. How It's Made: Ice Machines. Cocktail Shakers : Bar Solutions. Billes de précision - e-boutique HERVIEU. FAULHABER GROUP - Production & Robotique. After 5 Catalog :: Barware, Cocktail Accessories, Personalized Martini Glasses, Shakers, Cocktail Gifts, Bar Signs. Volumetric Feeders | Colortronic. ACS Group is pleased to announce that Colortronic North America is now part of AEC, effective November 1st, 2013. Many of the products and systems supplied by Colortronic North America over the last ten years will be supported by AEC to the extent of the components are available from our suppliers. New systems, including the volumetric and loss-in-weight feeding equipment, will be supplied by AEC. The Colorblend additive feeders will be supplied with the current A250 control system, and the AccuMeter product line is equipped with an Allen-Bradley control system and will handle the loss-in-weight feeding applications. All other products including the blending systems, drying systems, process cooling temperature control, and size reduction, are also available.
Please contact us at+1.847.273.7700 if you have any questions or need help with your new or existing system. Manuals for products prior to November 1st, 2013 are available here: Colortronic North America Manuals. Build A Mobile Bar - BaR2D2. As far as tooling for this project, here is a pretty good idea of what you'll need: Drill PressTable SawRouter/tableHand DrillScrewdriversPliersWire StrippersSoldering ironVoltmeterVarious ClampsViseHammerDremel ToolUtility KnifeHeat gun (hairdryer will work)WelderAir CompressorAir Stapler/nailerSocket SetBelt Sander First, purchase a sheet of 4ft x 8ft x 3/4 inch plywood.
I used the flooring grade as it will be covered later. Cut the sheet into 8 2ft x 2ft squares and mark their center points by drawing an X across the middle from the corners. Drill a 1/4 inch hole in the middle of them. Using a router table, measure out 9 inches from the edge of the cutting bit and bolt your wood square loosely to it. Three of the circles will be cut into rings. Take one of the circles and setup the router to create a groove about 3/4 through the thickness for the dome to sit in.
Resto.