Introduction to xPC Target and xPC Target Turnkey - Simulink Video. Print Preview - C:\TEMP\Adocweba_306_3512\home\AppData\Local\PTC\Arbortext\Editor\.aptcache\ae278800/tf278diw - sl_gs.pdf. Microsoft PowerPoint - VIP_seminar_May08.ppt - using_matlab_and_simulink_for_vip_slides.pdf. Xpctarget_basictutorial.pdf. Shg_xpc_target_print.book - xPC_Target_hardware_selection_guide.pdf. Microsoft Word - StandAlone.doc - Standalone.pdf. xPC Target Getting Started - xpc_target_gs.pdf. IntelGalileo. Intel Galileo Overview Galileo is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip (datasheet). It’s the first board based on Intel® architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all in the same locations as on the Arduino Uno R3.
This is also known as the Arduino 1.0 pinout. Galileo is designed to support shields that operate at either 3.3V or 5V. The core operating voltage of Galileo is 3.3V. Of course, the Galileo board is also software compatible with the Arduino Software Development Environment (IDE), which makes usability and introduction a snap. Visit the FAQ page for further informations. Getting Started I2C bus, TWI: SDA and SCL pins that are near to the AREF pin.
Power Electrical Summary.