SuperDroid Robots - Tamiya Educational Series Robots - Nightly. Our Tamiya robot kits are perfect for teachers and parents looking to teach kids the fundamentals of robotics.
These Tamiya models are not only educational, but simple to put together and fun to operate. If you're looking for a mobile robot platform that you can program and customize, visit our Programmable Robots category. We also have wheeled robot kits and treaded robot kits available for academic, surveillance, and inspection applications. Most questions can be answered with the information found on our support pages. Building a robot?
4WD Mobile Platform(with Romeo) - Nightly. Hello, new here.
Just bought a 3 wire LCD module an get this message compiling the example of the wiki page. Teensy USB Development Board - Nightly. The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects.
All programming is done via the USB port. No special programmer is needed, only a standard "Mini-B" USB cable and a PC or Macintosh with a USB port. Update: Discussion / Support Forum. Teensyduino - Add-on for Arduino IDE to use Teensy USB development board - Nightly. Teensyduino is a software add-on for the Arduino, to run sketches on the Teensy and Teensy++!
Running Sketches on the Teensy. Comet - kit supplier. Posted by pandi | Posted in Latest News | Posted on 28-07-2011 As posted earlier on one of our blogs earlier, Tenet recently launched the LED matrix display and here is a video of some animation running on the same using the Arduino as the graphics engine ! Check out the video below to see it in action ! For sales/technical queries, please feel free to contact us at info@tenettech.com. DFRduino Mega Kit - Nightly. I recently bought a DFRduino Mega kit for 4 motor robot to interface into a project.
Thus far I have gotten the DFRduino Mega 2560 V3.0 and Mega IO Expansion/Mega Sensor Shield V2.3 For Arduino Mega up and controlling my Dagu rover 5 chassis with its Dagu 4ch motor controller. What I am having issues with is connecting my Seeedunio Bluetooth Bee to the Mega 2560 through the Sensor Shield to control the whole thing via Android device.
I have tried the different COM ports and RXD/TXD points, but I am not getting any connection with the Bluetooth module. It is getting power, but does not go into the mode for connecting. I have connected this Bluetooth Bee to a Arduino Uno via Seedunino Bees shield before and controlled several digital outputs over Bluetooth via android app without a problem. Am I missing a patching issue on the board or am I programming wrongly? I would like to use COM1 as, if I am understanding correctly COM0 is where the USB serial travels through. Advancer Technologies: Muscle (EMG) Sensor v2 - Nightly. DFRduino Mega Kit For 4 motor Robot - Nightly. Hello, new here.
Just bought a 3 wire LCD module an get this message compiling the example of the wiki page. I got the new libraries supporting Arduino IDE 1.0 + from another post, and tried with IDE 1.0.1 and 1.0.4 libraries from this post: [url= Error message: [b]sketch_mar20a.ino: In function 'void setup()':sketch_mar20a:27: error: 'class LCD12864RSPI' has no member named 'initDriverPin'[/b] code used: [code]/*LCD ArduinoPIN1 = GNDPIN2 = 5VRS(CS) = 8; RW(SID)= 9; EN(CLK) = 3;PIN15 PSB = GND;*/ USB Host Shield 2.0 for Arduino « Circuits@Home - Nightly. This is revision 2.0 of USB Host Shield.
Thanks to new interface layout it is now compatible with more Arduinos - not only UNO and Duemilanove, but also big Mega and Mega 2560 work with Standard variant of this shield out of the box. No more SPI re-wiring and code modifications - just solder included stackable connectors (2x3 ICSP connector's female side should be facing down), plug and play! This shield is shipped as a kit, containing populated and tested board plus a set of stackable headers, which you need to solder on the board. Fully assembled shield is also available. This shield will work with standard (dual 5/3.3V) and 3.3V-only (for example, Arduino Pro) boards.
Arduino clones with standard connector layout, including ICSP connector, should work, however only BlackWidow has been tested so far. If your Arduino clone doesn't follow classic layout, take a look at previous revision of the shield. The following device classes are currently supported by the shield: Simple labs, indian arduino kit source. The Simple Labs' Quick start kit is Simple Labs' custom starter kit for arduino and contains everything you require to get started with your new Arduino Board.
It has enough components to keep you occupied for sometime. The Quick Start kit has been hand-picked and designed to give you maximum exploration opportunities in working with - I/O's, Displays & I2C Communication. The Quick Start kit also has a host of other things you would need - breadboard, wire strippers, aligners, wires, etc. The Quick start kit is different from the official Arduino Starter kit in terms of contents and pricing. However it throws in more value per rupee ;) Boe-Bot Robot Information.