Scientia Web Timetables - 2.0.38. Facebook. 99 Foot Rope Swing. - StumbleUpon. How To Make A High-Lighter Stun-Gun « Fear Of Lightning. First, dismantle the disposable camera and discharge the capacitor. Using the photo below, locate the large, black battery-like cilendar, and cross the two prongs with a screw driver. This is for safety purposes, since the capacitor can hold a charge for long periods of time, and electrocute you if you complete the short with your fingers. 2. Dismantle the highlighter. Take out the ink and felt tip and dispose of them. 3. The circuit is quite simple, consisting of the transformer, transistor, resistor, and diode from the camera circuit.
Note: If following the instructable guide, replace the film capacitor used with the one from the camera circuit/other (purchased online). Ensure the final circuit is as small as possible. 4. Note: I used a different type of battery, but AAs work just as well. 5. Note the small piece of electrical tape on the end of the capacitor. The layout of the highlighter insertion (in order from bottom to top) should be: 7. 7. 8.