Hack Livebox
Get flash to fully experience Pearltrees
Livebox Free/Libre & Open Source Software
We ensure to provide complete information and compliance with the terms of the FLOSS licenses apply. It is possible that some errors or omissions have occurred on this first phase of publication. The site is bound to evolve. We will seek to update and correct it regularly.
Nos live b o x sont compatibles SNMP ( Simple Network Management protocol ), avec un peu de Configuration et un bon outil, Performant et Gratuit, pour l’interroger, voici comment réaliser des Graphiques/Tableaux, en Live ou Historiques, accessibles depuis n’importe quel PC en Http : Tout d’abord, la Configuration du SNMP sur la live b o x , via Telnet 192.168.1.1 . Trois commandes suffisent, pour déclarer un nom de communauté accessible en lecture par une adresse IP donnée d’un PC sur le LAN (réseau local) et démarrer le service :
Faire un Graphe de l’Utilisat° de l'Accès Internet
[Python] Livebox_utility v0.2 - Pastebin.com
if v1: request. add_header ( "Authorization" , "Basic %s" % base64 . encodestring ( '%s:%s' % ( username , password ) ) . replace ( ' \n ' , '' ) )
livebox:livebox [DBZoo]
Along the way, this work has resulted in a flexible, open sourced, Home Automation controller .At this point you have downgraded your livebox to firmware 5.04 and its on your network with an IP of 192.168.1.1 what we need to do next is exploit a bug in its webserver so we can get to the command line. If the IP address 192.168.1.1 collides with an existing piece of equipment on your network its advisable to cable from your development computer directly to the livebox, otherwise you are going to have all sort of problem with this phase.
livebox:commandlineaccess [DBZoo]