background preloader

Pico Projector Development Kit (DLP

Facebook Twitter

Www.ti.com/lit/ug/dlpu003a/dlpu003a. Www.ti.com/lit/ug/dlpu003a/dlpu003a. Display-controller. Pico for Product Developers, DLP Pico Micro Display Chips & Chipsets, Pico Projection Technology. Www.ti.com/lit/ug/dlpu006c/dlpu006c. DLPLIGHTCRAFTER Texas Instruments. Display Controller. DLP Pico chipsets consist of two primary components: the Digital Micromirror Device (DMD) and the display controller chip.

Display Controller

Certain chipsets also include a power management chip. The DMD is installed in an optical module with optics and illumination to create the heart of the projection display. The display controller is installed in the electronics board near the optical module to control the DMD and perform necessary data formatting and image processing. Typical DLP Pico Display System Process for Developing Display Applications with DLP Match your Requirements to the Appropriate Chipset Determine system requirements, including but not limited to: BrightnessResolutionSizeContrastPower Consumption Product Portfolio Learn More and Begin Development Learn more about DLPC2607 controllerLearn more about DLPC6401 controllerExplore ideas, share knowledge, and ask questions Source an Optical Engine Optical Engine Manufacturers. Display Controller.

Www.ti.com/lit/ug/dlpu014/dlpu014. DLP Pico Projector Kit from Texas Instruments. DLP® LightCrafter™ is a compact evaluation module for integrating projected light into industrial, medical, and scientific applications.

DLP Pico Projector Kit from Texas Instruments

This DLP-based platform enables faster development cycles for end equipments requiring small form factor, lower cost and intelligent, high-speed pattern display. DLP LightCrafter features the 0.3 WVGA chipset, provides a variety of embedded functionality such as: structured light pattern projection, intelligent lighting, wavelength selection and portable display. Developers can easily create, store, and display high-speed pattern sequences through DLP LightCrafter's USB-based application programming interface (API) and easy-to-use graphical user interface (GUI). The module also features the powerful TMS320DM365 digital media processor based on DaVinci technology from Texas Instruments. The DLP LightCrafter includes an RGB LED light engine developed and manufactured by Young Optics International. The Development Kit for the DLP Pico Projector includes:

Overview. Micromirror Array - 0.17 HVGA Chipset - DLP1700. The DLP1700 Digital Micromirror Device (DMD) is a digitally controlled MOEMS (micro-opto-electromechanical system) spatial light modulator (SLM).

Micromirror Array - 0.17 HVGA Chipset - DLP1700

When coupled to an appropriate optical system, the DLP1700 can be used to modulate the amplitude, direction, and/or phase of incoming (illumination) light. Architecturally, the DLP1700 is a latchable, electrical-in/optical-out semiconductor device. This architecture makes the DLP1700 well suited for use in applications such as structured lighting, 3D optical metrology, augmented reality, microscopy, and spectroscopy.

The compact physical size of the DLP1700 enables integration into portable equipment. The DLP1700 is one of three components in the DLP 0.17 HVGA chip-set. Electrically, the DLP1700 consists of a two-dimensional array of 1-bit CMOS memory cells, organized in a square grid of 480 memory cell columns by 320 memory cell rows. Each individual micromirror is positioned over a corresponding CMOS memory cell. DLP Pico Projector Development Kit - DLP1PICOKIT - TI Tool Folder (Obsolete) Description View PicoKit3 The DLP® Pico™ Projector Development Kit Version 2.0 is a way to incorporate embedded video, portable projection and structured light into your products.

DLP Pico Projector Development Kit - DLP1PICOKIT - TI Tool Folder (Obsolete)

The development kit uses the DLP 0.17 HVGA Chipset available from TI. This Chipset is a miniaturized version of the popular DLP technology found in today's best projectors on the market. Using microscopic mirrors, TI's DLP1700 is a digitally controlled spatial light modulator (SLM) able to create binary light patterns with speed, precision, and efficiency for a multitude of light processing applications. Utilizing an efficient design with ultra-low power consumption, coupled with the robust DLP1700, you can expedite development and add projection or spatial light modulation into a vast array of products. The Development Kit for the DLP Pico Projector includes: DLP Pico projection device Power supply cable (operates from 110V – 220V) HDMI video cable HDMI-to-DVI adapter Technical Specifications.


  1. francoisoudot Mar 29 2014
    it seems like you have looked a lot at the DLP kit. I would like to buy one, do you have any advice to give me? thanks