Arduino Xbee-Shield. Mithilfe dieses Shields können einzelne Arduino Boards drahtlos über den Zigbee Standard verbunden werden. Der Artikel besteht aus Xbee Shield Grundplatine und einem Xbee 2.5 Chip Antennen Modul. Die Reichweite des Moduls ist mit 30m in Gebäuden und 100m im Freien angegben. Hier ist eine genaue Beschreibung des Moduls: The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). The Xbee shield was created in collaboration with Libelium, who developed it for use in their SquidBee motes (used for creating sensor networks). Schematic XbeeShieldSchematic.pdf (Eagle schematics and board layouts available from the Libelium SquidBee wiki download page.)
Jumper Settings The Xbee shield has two jumpers (the small removable plastic sleeves that each fit onto two of the three pins labelled Xbee/USB). Addressing Again, this address matching will only happen between modules on the same network and channel. Configuration. 125Khz RFID Empfänger Modul. GPS datalogging shield for Arduino. Would you like to use your Arduino to create geo-locative art? Or make a custom GPS device that can log sensor data along with the precise time and location? Perhaps you're looking to make a tracker, or want to make your own geocaching hardware. You are in luck! Here is my design for a Arduino shield that is perfect for any sort of project or artpiece that requires GPS precision time or location data. This shield supports any of four popular GPS modules and stores data on a standard DOS-formatted SD flash memory card.
Simply plug it into your computer when you've finished your data capture and the plain text files are ready for importing into Google Earth, GPSvisualizer, or a spreadsheet. You can build a waterproof GPS logger by putting the shield, Arduino and small power supply in an Otter Box! This photo has notes. USB charger for your gadgets. Arduino Proto-Shield Bausatz.