OMAPpedia. Getting Started Guide for Beagleboard xM OMAP35x - RidgeRun Developer Connection - Iceweasel. From RidgeRun Developer Connection Setting up a minicom client Minicom is a simple terminal program. We use it to access our servers via our serial port use the port ttyUSB0 to have access to board. Setting up Minicom Client - Ubuntu Create a bootable sd card Helpfull to generate a bootable with the necessary partitions to use. Creating a bootable SDcard Setting Up a tftp server An alternate boot mode of the EVM is TFTP (Trivial File Transfer Protocol) boot with NFS filesystem. Setting Up A Tftp Service Setting Up a NFS server In this tutorial I will describe how to set up a highly available NFS server that can be used as storage solution Setting Up A NFS Service Gstreamer Serial port RS232 Ethernet USB ports SD-CARD SLOT Checking out the the images created by the SDK stored in RidgeRun's repository. kernel x-loaderu-boot.binboot.scrfile system It will take some minutes to complete, after that, you should have an images directory with the kernel and the tar.gz version of the file system. u-boot.bin.
BeagleBoardEclipse - eLinux.org - Iceweasel. This page is about using Eclipse IDE for BeagleBoard. It is focused on JTAG debugging with e.g. OpenOCD, but can be extended to additional topics, e.g. C/C++ development. And, while the examples focus on Beagle, stuff shown here will most probably easily apply to other boards. Here, installation of Eclipse for C/C++ development and embedded GDB/JTAG debugging will be described. Install base Eclipse tooling, called 'Eclipse Classic' Install plug in for C/C++ development, called 'CDT' (C/C++ Development Tooling) Install some extensions for embedded development from Zylin (Zylin Embedded CDT) Note: The file names and versions given here are based on October 2009.
Eclipse Classic Download Eclipse Classic 3.5.x. In October 2009 this was version 3.5.1. 32-bit Linux version download resulted in file eclipse-SDK-3.5.1-linux-gtk.tar.gz. Installation is done by extracting downloaded (tar.gz) file (e.g. tar xvfz eclipse-SDK-3.5.1-linux-gtk.tar.gz). Cd eclipse . After doing this, Eclipse starts... BeagleBoardBeginners - eLinux.org - Iceweasel. This is the "community" beginners guide for TI's ARM based OMAP3 Beagle Board. For "official" beginners guide see My Beagle Board Out of the box experience. If something doesn't work or isn't covered in these guides, please feel free to ask at IRC or mailing list. But before you ask there, make sure you read the FAQs. So I got this little board, what do I do now? There are two major types of BeagleBoard currently in existence- the original BeagleBoard and the BeagleBoard-xM. 1.
BB xM also has several subversions: including Rev A, Rev B, and Rev C. Original BeagleBoard Links to the recommended collection of peripherals can be found on the bottom of BeagleBoard.org/hardware, but a slightly more detailed comprehensive shopping list can be found on the Beagle Board Shopping List. BeagleBoard xM Differences between requirements of the original BeagleBoard and the BeagleBoard xM Original BeagleBoard First of all you might want to check it for possible defects. BeagleBoard xM Now run minicom as root: