background preloader

Fermeture Eclair

Facebook Twitter

Fermeture éclair. Zippers Unzipped- How to Sew a Zipper. Hello readers- I’ve got a technique post for you today that was originally poster on Keeping it Simple.

Zippers Unzipped- How to Sew a Zipper

We’re going to talk zippers- specifically how to sew a zipper in. I know many new to sewing are scared of zippers and buttons, but there’s really nothing to be scared of, and being able to sew closures vastly expands the types of things you can sew. From floor pillows to dresses to zip flys, sew a zipper and you’re on your way. Tools: Two tools I find indispensable for zipper installation are my seam ripper and Scotch tape. You’ll also need a zipper foot for your machine. On Seam Application This is how I install my zippers 90% of the time. Press your seam open flat. Lay the zipper face down over the seam, lining the teeth up with the seamline. Use a few pieces of scotch tape (no more than 1 every 4 inches or so) to hold the zipper in place. Remove your tape. Use your seam ripper to remove the basting stitches. Stitch the top part of the zipper to the fabric. You’re done! Back side: Related. #Sureau Sew-Along# Poser la fermeture éclair.

Aujourd’hui, petite inversion dans notre programme : nous allons voir ensemble comment monter la fermeture éclair de Sureau ! En effet, il est plus facile de poser celle-ci avant de monter les manches. Cette technique est adaptée à tous les types de fermetures éclair, et convient particulièrement aux débutants. Si vous préférez poser une fermeture invisible n’hésitez pas à employer votre technique préférée ! Commencez par préparer la robe : surfilez indépendamment le devant et le dos du côté de la robe sur lequel la fermeture sera cousue. Puis assemblez les avec un point normal avant et après les marques de début et de fin de fermeture éclair. Ici, j’ai marqué la position du début de la fermeture avec une épingle.

Bâtissez soigneusement la fermeture éclair le long de la couture. Arrivé au repère de bas de fermeture, faites quelques points par dessus la fermeture éclair (attention de ne pas piquer sur une dent en métal !) Voila, votre fermeture éclair est posée ! Fermeture éclaire - braguette. Comment poser une fermeture éclair invisible / Cours de couture en vidéo. How to Install A Zipper (no pins) Centered zipper construction – Fashion-Incubator. If you don’t have the pattern yet, you can get it here.

Centered zipper construction – Fashion-Incubator

Note: this pattern comes from the lapped zipper tutorial. You will not need all of those same pattern pieces. The pieces you need are the right back bodice and the left neck facing. Cut two of each of those. You’ll also need a 7″ plastic coil zipper. Right sides together, stitch to the marked dot and stop, back stitching. Matching the layers (fabric and zipper tape) evenly, sew the right side of the zipper in place. Repeat for the left side, again, matching all layers evenly. I want you to notice something here.

Now sew the left facing into place, matching seam edges evenly. Repeat for the right facing. Fold your pieces as shown here. Now sew that into place with 1/4″ seam allowance. Repeat for the right side. Here, the outside corners are trimmed catty-corner and the top of the zipper tape has been trimmed away. Now turn the facings and body to their finished sides. Sewing Novice - A beginner's resource for learning to sew. I prefer to have some type of closure on my bags so I thought a recessed zipper would be neat.

Sewing Novice - A beginner's resource for learning to sew.

I didn’t actually try one out until my coworker said that she wanted a basic reversible tote, but with a zipper. You probably remember that I attempted it a few times before coming up with something that I was satisfied with. See the attempts here, here, and here. Continue reading for the tutorial. I’m going to tell you how I did it, but you should easily be able to adjust for any bag that you want to add the recessed zipper to. Recessed Zipper Tutorial I’m going to start with the tutorial for my bag, then at the bottom, I will explain the calculations that I used. My bag pieces were 13 1/2” across the bottom and 14” up the side.

Cut.