How to enjoy multimedia contents sto... Overview Synology NAS can serve as a multimedia server on the local area network, allowing home devices, such as TVs/stereo systems and Sony PlayStation3/Xbox 360, to play its multimedia contents.
These devices are DLNA/UPnP-compliant DMAs. To stream multimedia contents from your Synology NAS to DMA devices for playback, you need to configure media playback settings, including adjusting the basic settings of DMA devices, managing browsing settings of media files, and enhancing the compatibility of the files. This article will guide you through the steps to browse and stream multimedia contents from your Synology NAS to DLNA TV (Samsung TV – Model: LA40B650T1M – is taken for example here) and Sony PlayStation3. What is DLNA? Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry, and mobile electronics manufacturers. What is UPnP? What is DMA? Contents 1. Return to top 2. To configure media playback settings on your DiskStation: 3. The latest in hardware and gaming. We would like to thank Synology for supplying the review sample.
In a previous review we tested the Synology DiskStation DS412+ which in the end left us quite satisfied with its features and the performance it achieved. Nevertheless, these tough economic times don't allow most users out there to invest such an amount of money for a NAS server, so in this review we are going to take a detailed look at a budget-friendly NAS from Synology, the DS212j. Unlike the DS412+ which is intended for small and medium business environments the DS212j is mostly for home or small office usage due to its entry level hardware and the fact that it takes only up to two, not hot-swap, disks; however it runs the same operating system as all other Synology NAS servers, the DSM 4, meaning that its functionality and features are not affected.
How to secure your Synology NAS server on the Internet - Synology - Network Attached Storage (NAS)
How to set up IP cameras to patrol automatically on Surveillance Station. Overview Synology Surveillance Station provides you with automatic patrol to customize your surveillance needs through PTZ-supported cameras.
By setting up and using preset paths for your cameras to patrol by schedule, you can significantly improve the guard efficiency of your Surveillance Station. This article will guide you through the steps of setting up patrol paths on Surveillance Station. Contents 1. This article assumes that you have done the following tasks: Prepared an IP camera which supports the PTZ function and patrols. Return to top 2. Patrol paths are organized by a few preset points, and these settings can be found in the IP camera management.
Go to Management, select the desired IP camera and then choose Advanced > Patrol Settings. How to Setup Synology with TorGuard VPN Service. View topic - Change port 5000 to 80 or 443. Port forwarding.
Tools (scan,...) xCloud. SSL. Vpn. Camera. Router behind BBOX2. Synology. Synology NAS VPN. Wiki - Synology NAS. 3.
Name the Profile name (anything you want, e.g. "HMA VPN"), specify the Server address (IP address of the PPTP VPN server), your HMA! Pro VPN account username and your PPTP password (not your account password! Get your PPTP password in the VPN control panel).Then click "Next". Accèder à son Nas synology depuis son iphone via un accès VPN » ZenM. Allez, c’est parti pour un peu de truc inutile à faire mais tellement pratique.
Vous savez tous ce que c’est qu’un accès VPN (Virtual private Network) Depuis peu, je me suis amuser à configurer le packet VPN center fourni par synology et j’accède très simplement au contenu de mon NAS depuis mon iphone et de manière sécurisé. Téléchargement du paquet VPN center : Tuto provenant du site syno que je vais plus que paraphrasé (on réinvente pas la roue non plus). Déplacez vous dans le centre de packages, puis dans l’onglet disponible télechargé l’application « VPN server« . Puis placez vous dans l’onglet « Installé » et faite « Lancé« . Configuration du packet VPN Center : Examples of accessing the Synology DiskStation remotely. Problem accessing my NAS through \\ServerName. Repeater Bridge. From DD-WRT Wiki You are here: DD-WRT wiki mainpage / Linking Routers / Repeater Bridge A wireless bridge connects two LAN segments with a wireless link.
The two segments are in the same subnet and look like two ethernet switches connected by a cable to all computers on the subnet. Since the computers are on the same subnet, broadcasts reach all machines. DHCP clients in one segment can get their addresses from a DHCP server in the other segment. Use a wireless bridge to transparently connect computers in one room to computers in a different room when you cannot—or don't want to—run an ethernet cable between the two rooms. A standard wireless bridge (client bridge) connects wired clients to a secondary router as if they were connected to your main router with a cable. The limitation with standard bridging is that it only allows wired clients to connect to your secondary router. New in DD-WRT v24 is Repeater Bridge mode. Reference Image Assumptions: [edit] Broadcom [edit] Instructions.
DD-WRT Install (Supercharge) TP Link TL-WDR 4300 N750 Dual Band Router. Repeater Bridge. SFC /SCANNOW Command - System File Checker.