background preloader

Apple repair

Facebook Twitter

Replacement Right Arrow / Cursor Key, Type A Clip, Macbook Pro Unibody. Using self-made Magsafe possible? [Archive] Good luck!

Using self-made Magsafe possible? [Archive]

Thank you. I know it's not that easy. But maybe I'm really that lucky and everything works just fine. :D Nitpick: this is not some unique or special property of Apple power supplies. Additionally, the numbers you listed (45W, 60W, 85W) are simply the maximum ratings of the power supplies Apple shipped with each computer. Yes, but only the 85w supply can provide a higher voltage 18,5V than the others 16,5. I found this quite useful information. A: The macbook pro apple adapter (85w) actually put's out 16.5v just like the macbook adapter (60w) for normal usage. Q: Your site seems out of date, you say N2(B) tip, but it should be N3(B). In my case I would choose N3(B) tip with 18,5V. Here's some more information on how the magsafe works. Stanford Magsafe ( Hmmm, the voltage switching is kind of weird. Macbook Pro Unibody replacement Keyboard Key Keys.

‎ Build your own MacBook MagSafe adapter. Teardown and exploration of Apple's Magsafe connector. Have you ever wondered what's inside a Mac's Magsafe connector?

Teardown and exploration of Apple's Magsafe connector

What controls the light? How does the Mac know what kind of charger it is? This article looks inside the Magsafe connector and answers those questions. The Magsafe connector (introduced by Apple in 2006) is very convenient. It snaps on magnetically and disconnects if you pull on it. The picture below shows the newer Magsafe 2 connector, which is slimmer. The pins of a Magsafe 2 connector. Magsafe connector teardown I had a Magsafe cable that malfunctioned, burning the power pins as you can see in the photo below, so I figured I'd tear it down and see what's inside. Removing the outer plastic shell reveals a block of soft waxy plastic, maybe polyethylene, that helps diffuse the light from the LEDs and protects the circuit underneath. Cutting through the soft plastic block reveals a circuit board, protected by a thin clear plastic coating.

The circuit board inside the Magsafe connector is very small, as you can see below. Apple Laptop Toetsenbord BE voor Apple Macbook Pro A1278 (Late 2011) Core i7 2.8 - NEW replacement US Keyboard 4 Apple Macbook Pro Unibody A1278 13.3" BLACK MODEL. Please read the full listing.

NEW replacement US Keyboard 4 Apple Macbook Pro Unibody A1278 13.3" BLACK MODEL

By clicking Confirm bid you commit to buy this item from the seller if you are the winning bidder. You will enter a binding contract. Place bid Review and confirm your bid Bid confirmation d h m s day hour hours Free P&P See item description (Approximately ##1##) (Enter ##1## or more) (Enter more than ##1##) Your maximum bid: Increase maximum bid Confirm bid Cancel Change bid Close , you've been outbid. Definitive Guide to keyboard or key replacement for MacBook unibody.

Hi all, Stunningly late to the party but I just got hold of a Unibody Macbook that had coffee spilled on it at least two months ago and has been sitting in its box ever since.

Definitive Guide to keyboard or key replacement for MacBook unibody

I completely disassembled it right down to, and including, the keyboard, cleaning along the way with water (metal/plastic bits) and isopropyl (pcbs). I found this thread while searching for a way to power it on without the keyboard (keyboard traces have been destroyed by the coffee near the keyboard's 30-pin ribbon connector). I removed all the keys one-by-one. I used a small, plastic set square from high school. Working from the top row, I removed each key. Using this method, I managed to remove every key quite quickly, and without any breakages, and all the latches are still intact and show no signs of strain. The larger keys were a bit trickier and I've forgotten how I did those, but I removed all the standard keys first before attempting the these.

Anyway, regarding your questions, here's what I've discovered: