Silicone

Comment faire votre mandataire propriétaire Sugru. Pic2 shows a 2"x2"x2" solid silicone cube that cured enough in two hours to be removed from its plastic box form.

For years I have been looking for an inexpensive way to create a flexible skin covering for robots and electronic circuits. I have tried several kinds of casting urethane rubber and silicone rubber. They all have their difficulties and either set up to fast or too slow. They are too thin or they are too thick. They are also very expensive in small quantities. [Vidéo] La moisissure à grande échelle Faire - Faire le négatif "Outil" Your mold will be different - but here's the idea.

We want to make 2 female tools - one for each side. To do this, we must split the mold lengthwise (to allow easy mold release). So, the stand needs to hold the entire plug on it's side to present a "waterline" right down it's center. Positioning is critical as we don't want to make a mold that curves around itself more than 90 degrees (making removal impossible). Using Silicone Caulking to Make Molds. Faire un moule en silicone à partir de matériaux communs de ménage dans votre cuisine en 1 heure.