Arduino2

Voiturecapteurs

Achat module RF Récepteur sans fil et carte du module émetteur ordinaire super-régénération 433MHZ DC5V (ASK / OOK) à partir de 433M fiable RF module récepteur sans fil et les fournisseurs de modules émetteurs du conseil d'administration sur All société d. Acheter Livraison gratuite & Meilleur prix SIMCOM SIM908 C GSM / GPRS Module GPS d'origine à partir fiables SIM908-C sur tous les fournisseurs société de négoce Electroinincs. 1 SIM908-C 1 pcs SIM908-C module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications.

Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage. Specifications for data transfer GPRS class 8/10: max. 85.6 kbps (downlink) PBCCH support Coding schemes CS 1, 2, 3, 4 CSD up to 14.4 kbps Non transparent mode. Acheter Module de reconnaissance vocale (Compatible Arduino, un contrôle facile) avec wir Micro et 4 broches du module de reconnaissance vocale fiable pour les fournisseurs Arduino sur All société de négoce Electroinincs. Product Description We all know that there is a kind of moule which can control the light on and off.

You make a sound, the light turns on. Then after a while it turns off. This is not voice recognition. We may call it Sound Control. We've beening thinking about a module which helps to control other devices by voice and it will not cost too much. Parameters · Voltage:4.5-5.5V. Acheter Ethernet Shield Wiznet W5100 pour 328 Mega ONU 1280 R3 méga Uno 2560 (shiping gratuit d'entraide partir fiables Ethernet Shield Wiznet W5100 fournisseurs sur All société de négoce Electroinincs. W5100 for Arduino Ethernet network expansion modules can Arduino to become simple Web server or Arduino digital and analog interface network applications through the network control read and write. IDE, Ethernet library files can be used directly to implement a simple Web server.

At the same time, the versions support mini SD card (TF card) to read and write powerful function, can not be missed! The expansion board with a stackable design can be directly plugged into the Arduino our other expansion boards can also plug in to. Acheter Livraison gratuite 10PCS/LOT FR4 Copper Clad Blank Circuit Board Simple Côté 10x15cm PCB 1.6MM 1,5 ~ partir fiables FR4 cuivre plaqués ou doublés Blank Circuit à carte unique fournisseurs 10x15cm secondaires sur All société de négoce Electroinincs. FR4 Blank Copper Clad Circuit Board Single Side 10x15cm 1. Gold supplier authenticated by ALIBABA. 2.

All the goods for sale are in stock,we can ship to you within 2 working days. 3. And more important ,you will get the lowest price with high qanlity. Our Working Time:Monday -Friday,Except legal holidays. Shipping&Payment 1. we can ship items to all over the world.and we had been shipped to many. Planche à pain et Fils - Breadboard boutique bon marché et fils en provenance de Chine Planche à pain et à tous les fournisseurs Fils société de négoce Electroinincs sur Aliexpress. Livraison gratuite! 10DOF neuf L3G4200 module d'axe ADXL345 gyroscope HMC5883L accélération BMP085. Plus de 5pcs meilleurs prix, en d'autres composants électroniques de composants électroniques et sur Aliexpress. Trois axes Accéléromètre + magnétomètre (boussole) Conseil - ID LSM303: 1120 - 24,95 $: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage.

He told you "Go West, young maker! " - but you don't know which way is West! Ah, if only you had this triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient your project! ADXL335 - 5V prêt accéléromètre à triple axe (+-3g sortie analogique) ID: 163 - $ 14.95: Industries Adafruit, uniques et d'amusement de l'électronique de bricolage et trousses.

We've updated our favorite triple-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between. Fully assembled and tested.

Boards & Packs: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage.

>GPS

Barebones AVR dev. carte d'identification: 174 - $ 12.00: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage. We took the business-card-sized AVR target board from Evil Mad Scientist Laboratories and added a few components to make an AVR dev board that has only the bare minimums! Comes unassembled with: Printed circuit boardBlank ATMEGA328 with internal 1 MHz oscillator selected (default)28-DIP socket6-pin ISP AVR programming header0.1uF ceramic capacitor5mm diffused red LEDResistor for LED We suggest using this board in conjunction with a USBtinyISP programmer (not included), and having the programmer provide USB power to the board. Of course, any programmer can be used, just make sure that you also power the target board somehow. To get you started, here is a 'hello world' zip file. It contains a C program, compiled .hex file and Makefile for a blinking LED connected to pin PB5. Wire up the board as shown here (don't forget the 3 jumper wires up top, they are essential!)

ID capteur PIR (mouvement): 189 - 10,00 $: Adafruit Industries, uniques et d'amusement de l'électronique de bricolage et trousses. Contacteur magnétique (capteur de porte) ID: 375 - $ 4.00: Adafruit Industries, uniques et d'amusement de l'électronique de bricolage et trousses. This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. When the magnet is less than 13mm (0.5") away, the reed switch closes. They're often used to detect when a door or drawer is open, which is why they have mounting tabs and screws.

ID interrupteur à bascule à billes: 173 - $ 2.00: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage. Kit MintyBoost [v3.0] ID: 14 ​​- 19,50 $: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage. The world's first and only open-source hardware charger: The MintyBoost®! New version! Works with the new iPhone 4 & 5 and more!

Please review the Minty Boost project page(s) before purchase and assembly! , some phones require different modifications to the kit to charge properly! Some phones such as the *iPhone 3gs are very sensitive to charging via USB and may not work in all environments or configurations. Make your own iPod/iPhone/GPS/etc... battery-pack and recharger! The charger circuitry and 2 AA batteries fit into an small space such as an Altoids gum or mint tin, and will run your iPod for hours, 2.5x more than you'd get from a 9V USB charger!

New In Version 3: Provides 500mA @ 5V, tested and designed to work with all the latest iGadgets including the latest iPhones and iPods, etc., improved efficiency for high-drain devices, works much better with LiPoly battery mods. Kit comes unassembled and is suitable for beginners. Read more about the project on the Minty Boost webpage. Build Your Own minuscule caméra Wi-Fi. Internet de la caméra Things - Simple remote monitoring using a first-generation Eye-Fi wireless SD card and Adafruit Data Logging Shield for Arduino Introduction The Eye-Fi card is a tiny wireless memory card.

It stores photos and fits inside a camera just like a regular SD card, but also has built-in WiFi transceiver that can upload images to your computer, smartphone or to various photo-sharing sites. We use one here when taking pictures for our tutorials — it’s a great timesaver, eliminating the extra USB transfer step that’s otherwise necessary. Lecteur de carte magnétique - PS / 2 Interface - 3 Tracks (1 & 2 & 3) ID: 853 à 59,95 $: Industries Adafruit, unique et amusant bricolage électronique et kits. Decode what's hidden on your credit cards, or use it for an access system - this mag-stripe card reader can decode all three tracks! We like this small and easy to use mag-stripe reader for being so microcontroller-friendly. Instead of a USB port, it has a PS/2 interface and acts like a 'keyboard'. In fact, its designed to be a 'pass through'/'keyboard wedge' device for point-of-sale terminals.

What's nice about PS/2 is that it uses a single connector for power and data, and uses two data pins. When a card is swiped, the raw data is decoded, parity-checked and spit out as if they were typed on a keyboard. BeagleBone: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage. BeagleBone. New from the fine people who have brought us the Beagle Board, we now have a smaller, lighter, but powerful single board linux computer, Beagle Bone!

We like this move to a more compact and integrated SBC. For example, there is onboard Ethernet and USB host, as well as a USB client interface (a FTDI chip for shell access). It even comes preloaded with Angstrom Linux on the 4 GB microSD card! The Beagle Bone is a great step up from microcontrollers (such as AVR, PIC, ARM Cortex M3, 8051, Propeller, etc) to microcomputers. Unlike a microcontroller, where the FLASH, EEPROM, RAM, etc is all in one chip, a microcomputer has them separated out, like a classic computer such as a desktop or laptop machine.

One of the powerful abilities of the Bone is that it has I2C, SPI, and GPIO at a hobbyist-friendly 3.3V level (instead of the more difficult to interface 1.8V) while also running complex applications such as a webserver. Os Beagle A6 + Extras [Rev A6] ID: 513 - 89,00 $: Industries Adafruit, uniques et d'amusement électroniques et des kits de bricolage. From the fine people who have brought us the Beagle Board, a smaller, lighter, but powerful single board linux computer, Beagle Bone!

We like this move to a more compact and integrated SBC. For example, there is onboard Ethernet and USB host, as well as a USB client interface (a FTDI chip for shell access). It even comes preloaded with Angstrom Linux on the 4 GB microSD card!