Basic Bondage Furniture Construction. Bondage furniture is fairly common within BDSM pornography. However, companies actually producing such furniture are few and far between. Fortunately, with ingenuity and some basic woodworking tools, you can construct many of them yourself. Here are two simple ideas to get you started. These ideas are simply guidelines, not gospel. If you have a modification that makes you happy, you are limited only by your woodworking skills.
I love hearing what other DIYers have cooked up. Remember: When in doubt, overbuild your furniture. The Bondage Horse The bondage horse is probably the most versatile piece of bondage apparatus there is. The next step up is to improve your horse. If you have the time to construct your own bondage horse, this is the best option. Example ideas for a top board are plain wood, a padded top board using foam and vinyl, or a triangular (round the top edge) top piece for use with suspension play. The round-rack Always remember: Play safe, sane, and consensual. Saw_horse [Collar N Cuffs] Materials: #2 pine or pressure-treated pine lumber (2” x 6”, 2” x 4”, 1” x 4”, 1” x 2” scrap pieces, etc.) 3/4” plywood Table saw Battery-powered drill Phillips screwdriver bit Countersink 2-1/2” decking screws Finish nails Clamps Safety glasses and ear protection When you custom-build a sawhorse, you can create one with the dimensions and features that best suit your needs.
Don't hesitate to experiment with the dimensions and materials. Sawhorses may be made from almost any commonly available wood, from scrap lumber to expensive hardwood. The quality of wood should be based on the type of work it will be used for. Ordinary #2 pine is a good choice, but if you plan to use the sawhorses outdoors, choose rot-resistant pressure-treated pine, which is slightly more expensive. Whenever working with power tools, wear protective eyeglasses and ear protection, and follow all the manufacturer's safety recommendations. . , then flip it over and do the same on the other side (figure N). Here is how to make a bondage sawhorse. Here is directions to make your own wooden saw horse. All dimensions are approximate and should be tailored to your individual needs. Click on the image for a larger view.
The list of materials is fairly short and easy. 2X4 board pieces 4 legs 26 inches long minimum, about 36 inches max 2 lower support pieces roughly 24 inches long 1 lower board about 46 inches (just a little shorter than the top) 1 upper board about 48 inches 2 arm rests about 15 inches 2 leg rests about 20 inches 4 under-rest supports at least 8 inches long 2X6 or 2X8 depending upon preference. The wider board is more comfortable to lay on, but does not fit between the legs as easily. 1 top board with rounded upper about 48 inches long Note: the lower board may be the same width as the top one.
Hardware: All bolts are 3/8 inch on mine. Misc. 1 3/8 inch wooden dowel, only a couple feet is needed, 36 or 48 inches long will both leave leftovers 1 bottle of wood glue Sand paper in coarse, medium, and very fine Enjoy! Reader submission: A homemade bondage fuck bench | www.MetalbondNYC.com. Check out the pictures and information from RbbrStorage: Dear Metal, I thought you might be interested in the attached. There is a website out there that shows projects people have made by “hacking” IKEA products and using them for a different purpose than they were intended.
It inspired me to build my own fuck bench for less than $100, using a $30 IKEA sawhorse/table support, a $60 black leather footrest cushion, and less than $10 in assorted hardware and scrap plywood. The cushion can be raised at the front or back, or both, and it’s surprisingly stable. It includes a holder for a Fun Factory penis massager, made from a drink holder, a pipe support clip and a few eyelets, for hands-free orgasm.
The vibrator is a Fun Factory Cobra Libre from Stockroom: Using this is the only way I’m allowed to cum anymore, and only in bondage. I’m planning to add a few more details, like a platform for resting the weight on my knees, and maybe a cushion under the neck to hold the head up. Cheers, Built Tough to Play Hard - DungeonBeds.com.