How to build a tin can waveguide antenna. Assemble the probe and mount in can Now you'll need that bit of wire.
You'll need a soldering iron or a friend with one as well. Cut the wire so that when it is stuck in the connector as shown, the total length of both the brass tube and wire sticking out past the connector is 1.21". Pranav Mistry: The thrilling potential of SixthSense technology. MEMS Technology. There are several different broad categories of MEMS technologies, outlined below: Bulk Micromachining: Bulk micromachining is a fabrication technique which builds mechanical elements by starting with a silicon wafer, and then etching away unwanted parts, and being left with useful mechanical devices.
Typically, the wafer is photo patterned, leaving a protective layer on the parts of the wafer that you want to keep. Arduino - HomePage. Liquidware : Open Source Electronics.