CowBox. Run Linux on your Dockstar, GoFlex, or Pogoplug NAS. This guide will replace the locked bootloader on your device with a new version that can boot from a variety of locations, including USB drives. The installer will create a simple Debian Linux installation on your external USB drive. From there, you can install any of the 25,000+ packages from the Debian repository. If you decide that you don't like Debian and want to use the old Pogoplug software, simply unplug your USB drive and reboot. After you've installed Debian, please visit the forums for additional project ideas and support.
If you'd prefer to run a distro other than Debian, and just want to unlock the bootloader, please see the uBoot page. Install Debian Linux. Le logiciel de téléphonie mobile qui défie le contrôle des Etats. TP-Link TL-MR3020. See also TL-MR3040 and TL-WR703N or TP-Link TL-MR10U, TP-Link TL-MR11U, TP-Link TL-MR12U and TP-Link TL-MR13U Note: Many of these routers are marketed as a "3G travel router" but none actually include a 3G modem - the marketing term rather means that the OEM firmware supports a certain range of 3G/4G modems to be externally connected to USB because it contains drivers for those USB modems!
Ignore that, because with OpenWrt ANY router with USB supports 3G/4G hardware … The router is powered through a mini-USB socket stub (5V) and comes with a USB power adapter. Supported Versions The current release OEM source code available at: Features SoC: Atheros AR9330 rev 1 802.11 b/g/n 150 Mbps Powered via USB B-Mini (5 Volts) Tiny form factor 5.7 cm x 5.7 cm PCB 6.7 cm x 7.4 cm x 2.2 cm case Power consumption Input voltage: the router will function correctly when powered with voltages as low as 3.3 Volts (determined experimentally) instead of 5 V USB-Power.
Installation. Un-cloud your files in cement! 'Dead Drops’ is an anonymous, offline, peer to peer file-sharing network in public space. PirateBox. Problèmes et résolutions. Si vous avez un problème avec votre routeur et que vous vous sentez coincer et bon pour en racheter un autre cette page est faite pour vous, je vais décrire ici les problèmes que j’ai rencontrés ainsi que comment les résoudre.
Vous avez un gros problème et ne pouvez accéder à votre routeur que via le failsafe mode? 1. Démarrez votre MR-3020 en failsafe mode (décrit dans le paragraphe du dessous) 2. Donnez à votre ordinnateur l’ip 192.168.1.2 (procédure décrite avec le failsafe mode) 3. Placez le firmware openwrt sur une clé USB 4. /etc/init.d/boot start (si il y a des messages d'erreurs ce n'est pas grave) 7. Dmesg | tail -n 20 Vous devez voir quelque chose avec "sda" dans les messages 8.
Je partage et je reste libre... avec ma PirateBox [solidrnet] Le wiki de la Médiation Numérique en Deux-Sèvres a déménagé.
![Je partage et je reste libre... avec ma PirateBox [solidrnet]](http://cdn.pearltrees.com/s/pic/th/solidrnetpour-accompagner-26418421)
Cliquez-ici si vous n’êtes pas automatiquement redirigé sur le nouveau site. TeckNet iEP390 11000mAh Batterie de Secours Rechargeable pour Apple iPad 2, iPhone, iPhone 4G, 3G/3GS iPhone, iPod Touch (1G 2G 3G), Motorola Droid Eris X, HTC EVO téléphones Android, Blackberry (Curve, visite, tempête, gras): Amazon.fr: High-tech.
Dead Dockstar Resurrected with JTAG! « Your Warranty Is Void.com. The reason I haven’t written any more about my fun with the Dockstar was that due to an unfortunate set of circumstances I was left with a bricked dockstar.
(read: I did something stupid.) After performing a lot of research and thanks to a bunch of people over at the PlugApps.com Forum site who helped me, I was able to get it running. Read more for a complete list of what you will need including how to build an adapter and where to get the needed JTAG kit. Before we begin This document demonstrates how to recover your Dockstar and upload a custom bootloader to it using a JTAG cable.
Because of the nature of JTAG and the fact that manufacturers don’t typically like us having access to the JTAG port, these ports are often hidden in many different locations, usually unmarked or unpopulated headers, or other odd locations and is the way that the manufacturer loads the firmware for the very first time on to a new device. Legal Disclaimer Parts List Getting Started Header and Breadboard. Seagate Dockstar: Add an accessible serial port « Your Warranty Is Void.com. Ok, so not long after I published the article on the hardware teardown of the Seagate Dockstar, I couldn’t help myself so I started working on things to do with this device.
I did a lot of research in regards to the capabilities of the Dockstar, including being able to push a customized Linux OS on the device. Once I saw the article at Hackaday that covers exactly how to replace the OS, I knew I had to do it for myself.