Iphone - How to make a UITextField move up when keyboard is present. Drawing a standard focus ring inside of a cell's bounds. Troubleshooting. Why I can't upload my programs to the Arduino board? There are many pieces involved in getting a program onto your Arduino board, and if any of them aren't right, the upload can fail. They include: the drivers for the board, the board and serial port selections in the Arduino software, access to the serial port, the physical connection to the board, the firmware on the 8U2 (on the Uno and Mega 2560), the bootloader on the main microcontroller on the board, the microcontroller's fuse settings, and more. Here are some specific suggestions for troubleshooting each of the pieces. Arduino Software Make sure you have the right item selected in the Tools > Board menu. If you have an Arduino Uno, you'll need to choose it. Drivers Drivers provide a way for software on your computer (i.e. the Arduino software) to talk to hardware you connect to your computer (the Arduino board).
Access to the Serial Port Physical Connection Auto-Reset Bootloader Your operating system. Or: this is what's happening. TTL Serial Cable - C2-TTL. The Redpark TTL Serial Cable connects iOS devices to TTL serial devices. It supports communication at speeds up to 57.6 Kbps and requires iOS 5.0.1 or later. The cable is used in conjunction with the Redpark Serial Cable SDK. Together these tools enable hobbyist, education and enterprise developers to write iOS apps that communicate with serial devices. These apps may be deployed for private use at home, at school or in an office. Under current Apple policy this cable may not be used with apps sold on the App Store. Part #: C2-TTL Price: $59 UPC #: 013964221077 Warranty: 1 year Length: 1 meter Connector: 6-pin Q: What serial devices does the cable work with?
Q: What kinds of devices have TTL serial interfaces these days? Q: What iOS devices is this cable designed for? Q: What about the iPhone 5 and its new Lightning connector? Q: What is the pin out of the 6-pin connector? Q: Can I power the iOS device using this cable? Q: Can I power the serial device using this cable? Programming iPhone Sensors. BoardUno. OSH: Schematics, Reference Design, Board size Arduino / Genuino Uno is open-source hardware! You can build your own board using the follwing files: Programming The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar; see these instructions for details.
The ATmega16U2 (or 8U2 in the rev1 and rev2 boards) firmware source code is available in the Arduino repository. Warnings The Arduino/Genuino Uno has a resettable polyfuse that protects your computer's USB ports from shorts and overcurrent. Differences with other boards The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Power Memory PIN MAPPING ATmega328P. Reference.