DIY NS-10 Speakers. DIY NS-10 Speakers It's probably more a sign of being a contrarian than anything, but just when the Yamaha NS-10 was hitting its peak of popularity I was busy messing around with Dynaudio raw drivers.
Back then they were freely available to the DIY market and I eventually settled on the 17W75XL mid/bass and D-28 AF tweeter in a configuration very similar to that which would later be used in the BM6 passive near-field. For better or worse, that was my "monitor" setup for the next decade or so and like anything I eventually got used to the sound and could make fairly good judgements by them. Once Dynaudio Acoustics entered the "pro" market I was on to the next thing ;) But after reading the SOS article on the NS-10 I thought I should find out what I was missing a couple of decades ago. Used systems often come up for sale, though the condition of the drivers is often unknown and the shipping costs are prohibitive. The inductors appear to be wound on powdered iron cores. Speaker design. Featuring Eminence Speakers, Crown Amplifiers, DIY Speaker Kits - Speaker Hardware, over 30 years Audio experience. Www.billfitzmaurice.com.
NeoLev - tritonaudio. How it works Place them under your near field monitors, record player or any other device and isolate your equipment from feedback.
Neolev magnetic levitation dampers are our latest development. Placed under near-field monitors, home stereo speakers, turntables etc., they eliminate acoustic feedback and mechanical distortion to bring out the full potential of your gear. Cancellation of contact induced resonance is very effective as forces perpendicular to the device are stopped from being transferred. Based on two repelling Neodium magnets one single NeoLev lifts up to 8kg. NeoLev's are adjustable to ensure perfect levelling.
Sonic improvements from NeoLev damping feet NeoLevs eliminate direct coupling and lower related distortion, we like them under near field monitors or Hi-Fi speakers but the effect is clearly audible with any device they are put under. Loudspeaker Test Box. Loudspeaker Test BoxRod Elliott (ESP) Introduction Testing loudspeakers is covered in some detail in the passive crossover article (see Design of Passive Crossovers), but it is irksome at best to have to fiddle about with clip leads and components lying all over the workbench.
This simple project is intended to make life that little bit easier when you are trying to determine the optimum frequency compensation network for woofers and midrange drivers. Description They don't come much simpler than this. Of all the components, the pot is most likely to cause problems.
Speaker Grills. Speaker Textures and Coatings. Monitors vs. Speakers. Speaker Analysis Software. Power Amps. Speaker Protection Circuit. Pro Audio Speaker Equipment - PA Speakers, PA Floor Monitors, DJ Speakers, PA SubWoofers, PA Loudspeakers, Church Speakers, Guitar Cabinets, Bass Guitar Cabinets, Rack Cases, Snake Cables, Splitter Snakes, Patch Cables, PA Speaker Cables - Seismic Audio S. Karlson Loudspeaker Discussion. Seas Idunn 2-Way Speaker Kit - Pair - Complete: Madisound Speaker Store. Parts Express Project Gallery. ORION-3.4 Linkwitz Lab 3-way Kit Pair - Drive Units Only: Madisound Speaker Store.
ORION-3.4 & 3.5 & 4.0 Versions Open Baffle Speaker Kit - Pair - Drive Units OnlyPrice shown is for a PAIR The Orion-3.4, 3.5, 4.0 Kit is the definitive high end speaker design from Siegfried Linkwitz of Linkwitz Lab.
Madisound is offering the drivers for this system at a 10% discount off the regular price. We only have the drivers available: not the plans, crossovers or cabinets. Please visit TheOrionSpeakers.com and Linkwitz Lab website for this purchase information. This kit includes: 4x Tweeters - Seas T25CF002 The Seas Excel T25CF-002, "MILENNIUM" is a 25mm soft dome tweeter with a novel Neodymium based magnet system. Linkwitz Lab - Loudspeaker Design. Wayne's Speaker Building Page. Welcome Secrets of Home Theater and High Fidelity. DIY 11 Sonotube Subwoofer (If you would like to have your DIY project published in Secrets, please E-Mail Ralph Calabria at firstname.lastname@example.org.)
About the design and designerby Ralph Calabria Ron Stimpson is a 16-year veteran of the US Army, involved in Military Intelligence.His audio interests stem from the many years of reading audio publications (including Secrets, of course).Like a lot of us, his main impetus to start building subwoofers was the "I-want-it-all-for-almost-nothing" syndrome. Introduction Forget "Got Milk? " Now, even with a good home-built sub, you need power; but used amps like my Soundcraftsmen (model PM 860, 300watts/channel into 4 ohms) are available for $150 or less.When I tallied things up, I was still under budget (and based on advice from Tom Vodhanel, AKA "The Sub Human"), I ended up getting a new ART 351 equalizer to give me more flexibility in tuning the sub in my room. The Enclosure The End Caps The Ports The Legs Cosmetics So how'd it come out? Parts List About 10 oz. 1. Build a Cheap Cardboard Subwoofer! - SYSTM.