background preloader

InspectionSystems

Facebook Twitter

Canon EOS Digital Cameras in photography-on-the.net forums. John from PA wrote in post #16172117 In reliability or failure analysis, a stated "life" is the point at which 90% of the components will still function.

Canon EOS Digital Cameras in photography-on-the.net forums

Stated differently, 10% will fail by the stated life. So, if Canon follows that statistical method of calculating life, at 100,000 clicks, 90% of shutters should still be working. The science of statistical analysis is quite advanced (re: Motorola and six sigma); in the case of a Canon shutter the numbers could also predict the percentage that might reach 1,000,000 and the number likely that would fail at 10,000. It's an estimate of "average" shutter life, so roughly half should (theoretically) fail before that and half after. However, as with any technical product, a good proportion of the "before" failures are likely to be ones that let go quite early due to an inherent manufacturing fault, which shows up in the first 10,000 images or so. Senior Management Team - UVS Trenchless Technology.

Remote Video Inspection Intro. What is Remote Video Inspections?

Remote Video Inspection Intro

Remote Video Inspection (RVI) is the use of video camera systems to image the internals of structures, equipment, and components that are otherwise inaccessible due to physical configurations, safety concerns, or other limitations. Video inspection camera systems can range in size from several-millimetre in diameter, such as video scopes to large robotic wheeled or tracked pipe crawlers, depending on the specific applications.

Control Center Construction Camera Software - EarthCam.net. Visual Inspection of Concrete - InterNACHI. By Nick Gromicko and Kenton Shepard Most information available about concrete is written for contractors, for those who design concrete mixes, and for those who perform invasive testing.

Visual Inspection of Concrete - InterNACHI

The information provided here is specifically for those who perform non-invasive, visual inspections of concrete, such as home inspectors or commercial property inspectors using the International Standards of Practice for Inspecting Commercial Properties. In evaluating concrete problems, one of the important decisions home inspectors must make is determining whether a problem is the result of conditions that have stabilized with a low chance of continuing future problems, or whether the conditions that caused the problem are such that there is a high probability that problems will continue or worsen. Chemically, concrete is a complicated material, and a visual inspection will not always answer those questions. Constituent Material Properties Factors Affecting Concrete Binders Aggregates Water Mix Design Cracks.

Concrete

Class Surveys. We have a thorough knowledge of classification requirements and the structure of offshore oil & gas facilities.

Class Surveys

Classification societies such as ABS (American Bureau of Shipping), DNV (Det Norske Veritas), Germanischer Lloyd and Lloyds Register have for many years relied on external rope access specialists to assist the attending surveyor during the class inspection of ships and offshore structures. Our experience gained from working with various classification societies on many different types of facilities allows us to plan and execute surveys that are completed safely, to a high standard and with minimal disturbance to onboard operations. We have been audited and certified by ABS and Lloyds Register as an external specialist and work closely with their surveyors in providing the following services to complete survey requirements: Non destructive testing techniques Remote camera inspection systems.

Coating Inspection - Tcorr Inspection. Oilfield & Resource Rentals. ORR provides a range of Inspection and Testing services approved by the world recognised NATA organisation.

Oilfield & Resource Rentals

ORR is a Type C Inspection body accredited to operate in compliance with the requirements of AS/NZS ISO/IEC 17020 (2000) to conduct the following services on all offshore lifting and lifted equipment: Certified Visual Inspections – required periodic inspection of all types of tanks, containers, baskets, slings and rigging. DNV 2.7-1, AS EN 12079 Pre Load Out Inspections – final inspection of all lifted and lifting equipment prior to loading out to ensure that equipment is fully compliant with all relevant Australian & International quality standards and dangerous goods requirements. Hydrostatic Tests – on portable offshore tanks and safety valves to a pressure of 6 Bar (600kPa). Leakproof Tests – on portable offshore tanks and safety valves to a pressure of 6 Bar (600kPa). Accreditation No. 19130. Visual Inspection Service. Franklin Offshore Australia is NATA (National Association of Testing Authorities) accredited to perform Certified Visual inspections on Existing Rigging & Lifted Equipment (Frames, Containers, Lifting Beams, and other Receptacles for Loading & Unloading equipment.)

Visual Inspection Service

This is performed through a thorough visual examination of the item in question. Rigging & Lifted equipment are to be examined for any defects, measured and checked that all components are in a serviceable condition and comply with the relevant standard. Once the unit has been visually approved, Documentation is then checked to make sure all relevant standards have been adhered too and everything sill complies with relevant dates. Once complete, our Administration Team will type out a NATA Certificate Visual Inspection Certificate (CVI Certificate) to be issued to the client.

Structural Health & Condition Monitoring (SHCM) - Buel. Buel, in partnership with ICON Technologies Pty Ltd, designs and builds custom Structural Health and Condition Monitoring (SHCM) systems for installation on mining and industrial sites throughout Australia.

Structural Health & Condition Monitoring (SHCM) - Buel

ICON Technologies has over 24 years experience providing innovative solutions to challenging measurement and automation problems in industries that include mining, processing, materials handling, and general engineering. Rope Access Inspection & Maintenance Services. Maverick Inspection.