How Effective Are Electrofuels for Decarbonisation? Electrofuels are increasingly considered as a viable option for decarbonising transport.
But what exactly are electrofuels and how effective are they at reducing greenhouse gas emissions in transport? Electrofuels Explained Also known as e-fuels, electrofuels are carbon-based fuels produced from carbon dioxide (CO2) and water using renewable electricity as the primary source of energy. They can be gas e.g. methane, or liquid. The most common electrofuels include butanol, iso-octane, octanol, bio-Diesel and bio-jet. Sustainability When considering the future sustainability of mass transport, it is important to take a circular economy perspective. The Role of the Government When assessing the viability of electrofuels, the role of the government policy is vital. Currently, electrofuel production costs are high, and it’s unlikely they’ll ever match or beat the costs of fossil fuels this side of 2050. Why motoring fuels need toll blending? In motorsports, the automotive industry and throughout the chemical engineering sector, the preparation of special formulas with multiple ingredients is called ‘toll blending’.
The formulation of safe and efficient fuels is particularly challenging. The manufacturer is sometimes presented with a list of characteristics of the required product and is left to find ingredients to provide them; in other cases, permissible ingredients are pre-specified and engineers must see what can be achieved. In either case, the challenge is twofold. Performance in jet fuels. We’ve been using jet engine fuels for over sixty years, and the demand for high performance, cost-effective and environmentally friendly fuels increases all the time. Once the fuel has been produced, its performance may also be dependent on a number of other factors, including the way it is used and elements that are added to it. When Should You Replace a Fuel Injector? The demands of consumers for better fuel economy and lower emissions have led automotive technology to evolve from the carburettor to mechanical injection at the manifold and today’s electronic direct injection systems that feed fuel straight into the combustion chamber.
Both diesel and petrol engines now use direct injection, which is not just cleaner and more efficient: it provides improved driveability, better cold starting and more. However, like any component, injectors can wear over time. They can also be subjected to injector fouling fuels – particularly if the vehicle does a lot of short stop-start journeys – that clog the injectors and harm performance. So how do you know if an injector needs to be serviced or replaced? Three Tips For Fuel Efficiency. The cost of fuel is a constant frustration for the domestic motorist and professionals in the motorsport industry, and deriving maximum efficiency from fuel makes sense.
A vehicle that is running well will use fuel more effectively, so regular maintenance of any vehicle is important. Ensuring engine parts and fuel lines are free of deposits is important for smooth operation. Effective maintenance also includes making sure that your tyres are inflated to the correct pressure for the type of car and the kind of driving you’ll be doing. Fuel blending for advance fuels is a complex process. Diesel is a popular source of fossil fuel energy, however, the emissions that its combustion can produce are of concern to environmentalists and those campaigning for cleaner air.
In particular, with more regulations regarding CEC fuels – or those meeting Coordinating European Council standards – cleaner, oxygenated diesel blends are of greater importance all the time. Ongoing studies investigating blending diesel with other components such as methanol and ethanol – otherwise known as OBFs, or oxygenated bio fuels – are hoping to lead to renewable and efficient fuels that generate low emissions and conform to regulations governing CEC fuels. What Should You Consider When Buying Aviation Fuel? On the roads, refuelling involves minimal choice – there’ll be two or three pumps if you’re lucky.
In aviation it’s another matter: a whole range of factors may determine the most suitable fuel. As well as the type of aircraft, engine, air speed and altitude, there are factors like storage conditions, temperature tolerance, pumpability, safety, emissions and renewability. Several bodies define standard fuel blends, but these can be further blended or improved with additives. However, when one element of a fuel specification is changed, other characteristics may be affected, so fuel formulation is a complex safety critical operation. Suppliers like Coryton excel in this specialist area. CAF is now one of Europe's Top 1000 Fastest Growing Companies. Why motoring fuels need toll blending? Diesel still top powertrain choice but petrol, hybrid and EVs are on the rise.
Diesel remains the most common fuel choice for cars used by the UK’s top 50 vehicle leasing firms, but with a significant rise in the proportion of hybrid, petrol and electric cars in this year.
Changes in demand are due to a mixture of fleet policy changes, growing environmental awareness, government policy and tax benefits. What changes in demand are the leasing companies seeing? Diesel cars had a 71.4 percent share for the fifty largest leasing companies in the UK this year. Petrol numbers have risen from 20 to 22.4 percent, with hybrid increasing to 5.2 from 4.9 percent and the share of pure electric cars going from 0.3 up to 0.9 percent over the same period.
According to the major leasing companies, we are not seeing a reaction to the ‘demonisation’ of diesel cars by the press following the VW emissions scandal. Importance of oxygenated components for fuel blending. What is the development to delivery process of reference fuels? - Blog Oval. Fuels are a lot more complex than most people realize.
Importance of Fuel Toll Blending for Automotive Business. Everything You Need to Know about Emission Fuel Testing. There has been increasing concern recently about the number of premature deaths that are caused by emissions from vehicles and the resultant air pollution.
This has led to a focus on emissions testing and, in particular, the need to ensure that when fuels are tested, the test regime reflects the real life use of a vehicle. The EU has been trying to reduce pollution levels across Europe, initially by focusing on nitrogen oxide (NOX) produced by diesel cars. The limits for emissions from these vehicles have been reduced from 500 mg / km to 80 mg / km. Lab tests alone don’t give the true picture Until 2017, air pollution from a car’s fuel use was measured by laboratory tests. For example, the NOX test has been joined by a test for ultrafine particles. More rigorous CO2 emissions testing. Wanderglobe. Ethanol and methanol may sound virtually the same and look similar if you place these colourless liquids in a glass, but they are quite different in a number of ways.
Knowing the differences is crucial, as incorrect use could have dangerous or even fatal consequences. Both are variants of alcohol. Methanol consists of a single carbon atom, while ethanol is made up of two carbon atoms. Introduction to Motorsport Fuels - Vletuknow. “Soot-free” is likely to become an increasingly adopted standard for vehicles in cities across the world. A soot-free engine is one that meets the Euro VI standard, in Europe, or EPA 2010 in the US. And now China has joined in, with a China VI standard for carbon-free vehicles. China’s battle against pollution China has been battling pollution for some time and trying to reduce the adverse effects on its population’s health, from poor air quality. Its new VI standard is a major step forward in this struggle, and given China’s size and importance in world trade it will have a major impact on the market for carbon-free vehicles, and on the development of new fuels.
OEM lubricant recommendations – an overview. Many technicians consult the original equipment manufacturer’s (OEM) recommendations with regard to lubricant use for a new component. While this serves as a useful guideline, there are some considerations that you need to think about. Open to interpretation An OEM lubricant recommendation usually says something like ‘use a good-quality turbine oil with a viscosity of ISO VG 32’. What does this mean, and can this be misinterpreted? Why Alcohol Fuels Are Important for a Sustainable Environment? The increasing threat of global warming means that we all need to do our bit to reduce carbon emissions.
In an effort to safeguard the environment, fuels that offer more sustainable potential are continually being researched. In recent times, alcohol fuels have been making a name for themselves as a sought-after eco-friendly option. Aviation fuel management: an overview. Aviation fuel management is a specialist area. To ensure that the operation runs smoothly and cost-effectively, specialist processes and systems have to be designed and operated by employees with particular skills. With quality assurance central to the whole operation, let’s take a look at the key challenges facing the aviation fuel management team. 1. Methanol fuel as an effective motor racing fuel - Motor's War. How to resolve low-speed pre-ignition. Top three bio-components for fuel testing. Top three bio-components for fuel testing. Coryton Advanced Fuels. 7 things to consider when testing jet fuel lubrication - Blog Post. How to Comply with Racing Fuel Standards – Coryton Fuels.
Top Features of Racing Fuels. What Is Engine Emission Testing and Why Does Your Vehicle Need it?: corytonfuels. High-Performance Fuels Used for Motorsports by corytonfuels. Motor racing is an exciting, fast paced sport with many millions of followers around the world. The drivers are highly skilled, the cars are built and maintained to exacting standards and, of course, high quality motorsport fuels are needed to ensure that the vehicles perform at their optimum level. Jet fuel supplier comply with the Jet screen programme. Very specific demands are placed on aviation fuel due to the extreme conditions experienced when a plane is in use. The Newest Web Design Trends to Look Out For - Blueflamingo UK. Web design constantly evolves and changes, in both terms of functionality and art, reflecting its role in society.
Web design represents the evolution of changing desires, technology and style of the time. Web design can also be viewed from a technological point of view, where it has become a huge part of the lives of everyday people across the globe. It is difficult to imagine the Internet now without different styles of background, typography, music and animated graphics.
Design changes with remarkable speed, and if you wish to stand out from the crowd, you must keep up with web design trends. Why customer retention should form the basis of your marketing strategy - Blueflamingo UK. Most businesses understand the importance of excellent SEO strategies to attract new visitors to their website. Why Testing IVD Fuels is Important. Fuel additives are chemicals that are added to fuels to improve their performance. They fulfil a range of functions including reducing emissions, increasing the lubricity of the fuel, controlling corrosion, and importantly, protecting the vehicle’s engine against deposits that can build up on intake valves, carburettors, fuel injectors, and the walls of the combustion chamber. In fact, these deposits can occur in all of the pre-combustion components that make up the fuel inlet system.
The deposits themselves can be hard, soft, or sticky but usually have high carbon content. Importance of Using Biodiesel Blends. The future of performance of fuel and testing: an overview. Performance in jet fuels. A beginner's guide to specialist fuels. Singing Bowls - 7 Fuel Design Techniques for Best Results. Main features of fuel testing and analysis. How to Avoid Hazardous Waste Generation During Fuel Blending. How a real driving emissions (RDE) test is conducted. The Effects of Fuel Quality on Gasoline Direct Injection Engines. Why are special fuels and additives developed? » Dailygram.
Top Features to Look for in Racing Fuels by blog14. What are the benefits of fuel toll blending in the automobile business. Motorsport Fuels - Is It Chequered-Flag Time for Petrol? Different Fuel Types and How They Affect Performance. 6 Services Your Fuel Suppliers Should Provide. Everything you need to know about aviation fuel and its suppliers - Everest Haber. Diesel still top power train choice but petrol, hybrid and EVs are on the rise.