Electroluminescent (EL) Panel - 10cm x 10cm Blue. This is a big sheet of flexible plastic coated with EL material so its like one big glowing square. Add a small inverter and you can add a cool glowing square to anything, clothes, shoes, anything. EL panel is the big sister to EL wire - it has the same glow effect but with a flat shape instead of a round shape. This is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even glow over the entire shape.
Inventables: The Hardware Store for Designers. Circular Dual Lit Fiber Optic Display. Product Details This technology incorporates a proprietary abrasion process that causes plastic optical fiber panels to glow uniformly. Most of these processed backlighting panels are constructed of .010" diameter plastic optical fibers. Utilizing a reflective backing, the panel can be as thin as .013" for a single layer device. Two or more layers provide greater brightness and improved uniformity. This technology is ideal for backlighting membrane switches, LCDs, panels, control consoles, PRNDLs, keyless entry, machine vision, man-machine interface, elastomeric keypads, courtesy lights, signs, and point of purchase (POP) overlays.
The thin profile and flexibility of these backlighting panels allows placement between an elastomeric keypad or overlay and a non-tactile or tactile dome membrane switch. Fiber Optic Backlight. Product Details There are a few options for large, thin, flexible fiber optic panels that provide uniform illumination for backlighting. Large panels are usually lit by a super-bright LED diffused over the entire area. These fiber optic panels are an alternative for backlighting LCD displays or button panels.
The typical choices are electroluminescent (EL) and various combinations of LED arrays and light pipes (lightpipes direct the light from the LED to a destination within the housing of a product). There are a few different ways these fiber optic panels work, depending on the brightness and thinness you require. Normally, fiber optic strands transmit light from one end to another with no loss of light out the side. However, this would not make a very good backlight. These fiber optic panels are made of adjacent fiber optic strands in a very thin sheet. The fiber optic panels glow in only designated sections.
Powerless Illuminating Polymer Ribbon. Dritz 9531B Braided Elastic, Black, 6-Yard by 3/8-Inch: Arts, Crafts & Sewing. Dritz 9507B Non-Roll Woven Elastic, Black, 1-Inch: Arts, Crafts & Sewing. How to Make a Cheap GRID-IT! Wrap Organizer. Elektex Smart Fabric Controls for iPod. Style Elektex is what makes BlackCoat Made for iPod. In other words, it provides the function, while BlackCoat is the form. Below are links to all BlackCoats Made for iPod. Work MFI :: Work Premiere MFI :: Sport MFI :: Surf MFI You can also purchase BlackCoat JFK and SYD without the controls and upgrade at any time. Performance Highly Durable: Tested at 5 million key presses, ElekTex touchpads are washable, flexible and have long-wearing durability and yet they drape like any fabric.
Low Impact Design: At 0.6mm thick and less than 25gms (less than 1oz), ElekTex fabric touchpads are barely detectable in wearable constructions. Utility ElekTex patented touchpad and ribbon cable technology combines all the benefits of fabric with the interactivity of electronics in its solutions for wearable technology. Control Sensor: No wires, no cables, no switches, no bumps. the ElekTex Control Sensor is a 100% fabric control for your iPod. iPod Connector: Kata (How to Use) Quality. Amazon.com : Universal iPod iPhone iPad Dock Converter Cable Adapter 30-Pin Female To Stereo 3.5MM Lead Wire Cord Conversion Line Out Zen Microsoft Zune iRiver MP3 Player Droid Android Blackberry Palm Pre Evo Cell Phone Bose Sounddock.
Connect iPhone, iPad, iPod and Android smartphones and tablets to audio sound dock with dockBoss. CableJive dockBoss5: Smart USB and audio adapter for iPhone and iPod docks.