KNX product certifcation. Internet Engineering Task Force (IETF) IoT protocols. 6LoWPAN. 6LoWPAN is an acronym of IPv6 over Low power Wireless Personal Area Networks.[1] 6LoWPAN is the name of a concluded working group in the Internet area of the IETF.[2] The 6LoWPAN concept originated from the idea that "the Internet Protocol could and should be applied even to the smallest devices,"[3] and that low-power devices with limited processing capabilities should be able to participate in the Internet of Things.[4] The 6LoWPAN group has defined encapsulation and header compression mechanisms that allow IPv6 packets to be sent to and received from over IEEE 802.15.4 based networks. IPv4 and IPv6 are the work horses for data delivery for local-area networks, metropolitan area networks, and wide-area networks such as the Internet.
Likewise, IEEE 802.15.4 devices provide sensing communication-ability in the wireless domain. The inherent natures of the two networks though, are different. The base specification developed by the 6LoWPAN IETF group is RFC 6282. Application areas[edit] Roll-rpl-19 - RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks. [Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits] [IPR] Versions: (draft-dt-roll-rpl) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 RFC 6550 ROLL T. Winter, Ed. Internet-Draft Intended status: Standards Track P. Thubert, Ed. Expires: September 14, 2011 Cisco Systems A. Brandt Sigma Designs T. Internet-Draft draft-ietf-roll-rpl-19 March 2011 provisions of BCP 78 and BCP 79. Internet-Draft draft-ietf-roll-rpl-19 March 2011 Table of Contents 1. Zigbee certification program. Bluetooth™ Qualification Program. In this article, derived from the author’s book Bluetooth Revealed, Second Edition, Bluetooth wireless communication authority Brent A.
Miller presents an overview of the Bluetooth qualification program (BQP). The BQP was recently instituted by the Bluetooth Special Interest Group (SIG) to help ensure that products bearing the Bluetooth logo conform to the Bluetooth specification. Qualification is the process by which an implementation of a specification is tested to ensure that it faithfully follows the specification.
Many major public specifications in the information technology and communications industries include some sort of qualification program. Qualification is intended to help ensure that products correctly and completely (at least to the extent that completeness applies to a particular product) implement the specification.