background preloader

Box

Facebook Twitter

DDNS – Free Dynamic DNS Providers. We maintain the #1 list of Dynamic DNS (DDNS) providers online.

DDNS – Free Dynamic DNS Providers

Dynamic DNS is a method that allows you to notify a Domain Name Server (DNS) to change in your active DNS configuration on a device such as a router or computer of its configured hostname and address. It is most useful when your computer or network obtains a new IP address lease and you would like to dynamically associate a hostname with that address, without having to manually enter the change every time. Since there are situations where an IP address can change, it helps to have a way of automatically updating hostnames that point to the new address every time. Enter DDNS to the rescue. DDNS Client [OpenWrt Wiki] If you want to set up a DDNS Server instead, please see ddns.server.

DDNS Client [OpenWrt Wiki]

Introduction DDNS stands for Dynamic DNS. Simply put, using this service gives a name to your IP. So if you're hosting something on your line, people would not have to bother typing your IP. They can just type in your domain name! This guide will help you configure your DDNS service, so that your router auto-updates your IP to your DDNS provider. Image Generator (Image Builder) - EN [OpenWrt Wiki] If you do not want to download a prebuilt image or go through the entire compilation process, the alternative is to use Image Generator (formerly called Image Builder).

Image Generator (Image Builder) - EN [OpenWrt Wiki]

This is a pre-compiled OpenWrt build environment suitable for creating custom images without the need for compiling. Image Generator will not run on 32bit platform such as i686. You need 64bit linux such as amd64, see ticket. TP-Link TL-MR3020 [OpenWrt Wiki] Openwrt:extroot [Matthias' Piratebox-Scripts] Usually the PirateBox is installed on a FAT USB Stick using different loopback devices for extending the root filesystem.

openwrt:extroot [Matthias' Piratebox-Scripts]

The loopback devices are pointing to files, that ext3-filesystems. In some cases you don't want to have this, or you want to have a bigger ext3 root using the OpenWrt extroot system. The following steps are based upon OpenWrt's wiki on extroot. The following steps assume: The extroot device is a USB Stick and the ext3 partition is the first If not, apply your custom configuration (i.e. Make internet available at the system The easiest way to make Internet available is on system, which have a dedicated WAN port. On systems with only one ethernet port like the MR3020 or VoCore you have two options: Google Traduction. Google Traduction. TP-Link TL-MR3020 [OpenWrt Wiki] Teeny_tiny_cms - the smallest cms ever for webware. Permalink Raw Message Report I setup this and try run.

teeny_tiny_cms - the smallest cms ever for webware

But error found. Teeny_tiny_cms - the smallest cms ever for webware. Webware Application Server discussion headers.

teeny_tiny_cms - the smallest cms ever for webware

BAOW download. Pyplate. Install Pyplate. Requirements.

Install Pyplate

ContentManagementSystems. A content management system (CMS) might be simply defined as a system which supports the publishing or sharing, editing or manipulation, searching and indexing, archival or versioning of content, frequently documents, typically using Web technologies.

ContentManagementSystems

A more extensive definition can be found in the Wikipedia topic entry. In plainer terms, content management systems are the applications used to manage Web sites where the writers, editors and users are able to upload, edit and manage content without needing to know too many of the technical details about how the site actually works. Python-based products, although in the minority in the larger market of CMSs, possess several inherent advantages.

Python's Unicode capabilities, for example, make its derived products particularly popular in continental Europe and Asia, as compared to those based on PHP, Ruby, and so on. Django CMS – The easy-to-use and developer-friendly CMS - www.django-cms.org. Regular development snapshots. Hi guys, after some good work from stylesuxx and some fine tuning today by myself, I was able to create an AWS instance, which is coming regulary online on Monday mornings at 01 o'clock am (GMT+1), build and upload new images.

Regular development snapshots

The snapshots are tanking from: LibraryBox-Installer (auto installer functionality)USB configuration scripts (LibraryBox feature)LibraryBox openwrt packagePirateBox openwrt packageextendRoot ; install software on the USB stickPBXOPKG - add our custom repository to default opkg.confPirateBox meshing scripts ; that takes the stuff from PirateBox-Mesh (some of the scripts where just created as new openwrt packages instead of single package files.) PirateBoxScripts_Webserver - the content of /opt/piratebox From each Project above, it is switched to the "development" branch and then it is generated, build or whatever is needed.

In the end, we have a full repository- different script files and the auto installer. BATMAN. PirateBox (General) Meshage des pirateboxs. Résultats de recherche. Configuration_serveur_dns_dhcp. Quelques explications sur les options utilisées.

configuration_serveur_dns_dhcp

Il en existe bien d’autres, je vous invite à consulter le man pour approfondir le sujet… Ce qui suit en est largement inspiré… Dnsmasq [OpenWrt Wiki] Dnsmasq is lightweight, easy to configure DNS forwarder and DHCP server. It is designed to provide DNS and, optionally, DHCP, to a small network. It can serve the names of local machines which are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated addresses to appear in the DNS with names configured either in each host or in a central configuration file. Getting started with PuTTY. Previous | Contents | Index | Next This chapter gives a quick guide to the simplest types of interactive login session using PuTTY. 2.1 Starting a session When you start PuTTY, you will see a dialog box.

This dialog box allows you to control everything PuTTY can do. See chapter 4 for details of all the things you can control. You don't usually need to change most of the configuration options. In the ‘Host Name’ box, enter the Internet host name of the server you want to connect to. Je n'ai pas accèsà la configuration de ftp - BiblioBox - Le forum d'entraide des utilisateurs de BiblioBox. Openwrt:troubleshooting [ PIRATEBOX ] Technical FAQ I can't execute command x from the Post Installation guide, what is wrong? First of all double check if you typed in the command correctly. If so, your box is maybe not done with installation. The first clue is, that your command line looks like this root@OpenWrt:~#.

The hostname is still OpenWrt, which is changed during a successful installation. It seems my installation is still running, what went wrong? Upgrade to v2.1. Remettre le firmware d'origine sur MR3040 - BiblioBox - Le forum d'entraide des utilisateurs de BiblioBox. How to reset TP-LINK products to factory defaults. Notice: A hard reset will restore your device to factory default settings. You should reconfigure the device from scratch or you can load the configuration file you have backed up before the reset. For most products(Wired Router, Wireless Router, ADSL2+ Modem Router, TD-8616, TL-MR3420 V1, TL-MR3220 V1, TL-MR3040) Directly press and hold the RESET button on the rear panel/panel layout with a pin for approximately 6 to 10 seconds when the device is running.Release the reset button and wait for the device to reboot. If you can see all the lights flashing, then go off and some lights go back on slowly during the process, that means the device has been reset successfully.

Building Your Own LibraryBox v2.1. Config Options On the USB drive under the LibraryBox folder, there is a folder named "Config" that is full of text files. This includes: channel.txthostname.txtlibrarybox_ftp.txtlibrarybox_ftpadmin.txtlibrarybox_ftpanon.txtlibrarybox_ftpsync.txtlibrarybox_ftpsyncport.txtlibrarybox_shoutbox.txtssid.txtsystem_hostname.txttxpower.txt Some of these are controlled by the menus mentioned above in the FTP setup, but several of them allow you to customize your LibraryBox.

Help me unbrick my mr3040. How to debrick TP-Link MR3040v2. Débrickage d’un routeur sous OpenWrt [video] Votre piratebox n’a plus de wifi, affiche une page blanche à la connexion, vous ne pouvez plus y accéder? [MR3020] Vidéo disponible ici Réponse: la méthode qui marche alors que tout espoir est perdu est e démarrage en “failsave mode”, je m’explique connectez votre routeur directement à votre ordinateur via câble ethernet et d’attribuez une IP fixe à son ordinateur de type 192.168.1.2 (si vous ne savez pas comment faire il faut naviguer dans votre panneau de configuration window comme ceci: “Réseau et Internet”>”Centre Réseau et Partage”>à gauche “modifier les paramètre de la carte”>clique droit sur le premier icone>propriétés>”protocole internet version 4″>propriétés>”utiliser l’adresse IP suivante” et choisissez 192.168.1.2).

Openwrt:extroot [Matthias' Piratebox-Scripts] Rootfs on External Storage (extroot) [OpenWrt Wiki] More often than not, a limited amount of storage is available on embedded devices. While flash memory will generally accommodate a bare OpenWrt installation, more storage for applications and data can expand a device's potential; with many devices having expansion capabilities built-in (i.e. USB, SATA, and PCIe ports, NAS, etc.). Applications are developed with the idea they should be installed in the root file system (rootfs). By employing extroot, expansion of the storage capacity of your root file system is accomplished by using an added storage device. During the boot process, external storage space is mounted as the root file system, or in an overlay configuration over the original file system. Alternatives Configuring the bootloader to boot from an external USB drive, of which most can not. Openwrt:extroot [Matthias' Piratebox-Scripts]

MiniDLNA showing up on client, files are not showing. I'm streaming to a Logitech Revue, and I've actually had success with MiniDLNA before. This time around I don't seem to be so lucky.MiniDLNA is updating, I know this because if I edit the name of the server and restart it, the client shows these changes.I'm assuming I'm having some sort of permission errors, though I'm having trouble trying to pinpoint exactly where the problem is.I'm sorry if I don't have enough information here, but I'm more than willing to divulge anything that I am missing.Thanks. PirateBox Forum - PirateBox (General) Search Results. LibraryBox-Installer/box_init_setup.sh at master · LibraryBox-Dev/LibraryBox-Installer. MiniDLNA showing up on client, files are not showing.

Construire sa BiblioBox avec un MR3020 - BiblioBox - Le blog de l'actualité des Bibliobox. Grâce à sa campagne de crowdfunding, Jason Griffey a pu développer une v2 de sa LibraryBox. La v2 apporte des changements majeurs à la BiblioBox. D’une part, l’installation est simplifiée. D’autre part, la v2 dispose de nouvelles fonctionnalités comme l’intégration de statistiques et un accès en FTP pour administrer sa BiblioBox. Tutoriel avec MR-3040 [vidéo inside] Bonjour et bienvenu vous voici sur la page du tutoriel avec le TP-MR3040. Tous les scripts présentés, ont été développés par David Darts et Matthias Sturbel. Si vous avez des suggestions, des commentaires ou des questions, n’hésitez pas à m’envoyer un petit mail: arthur.pattee@gmail.com Le tuto en vidéo version Mac: Le tuto en vidéo version PC est en production Voici la marche à suivre pour créer votre piratebox: Pour savoir si votre routeur est un V1 ou un V2 référrez vous à l’étiquette sur la tranche inférieure de la boîte:

TP-Link TL-MR3040 [OpenWrt Wiki] TP-Link TL-MR3020 [OpenWrt Wiki]